E-MU ESI 4000

HxC Floppy emulator support for all others Keyboards/Samplers...
djbuzzard
Posts: 11
Joined: Sun Jul 04, 2021 2:01 am

Re: E-MU ESI 4000

Post by djbuzzard »

USB HxC Floppy emulator
HxC vers. 3.7.1.5a

Jeff
Site Admin
Posts: 8092
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: E-MU ESI 4000

Post by Jeff »

djbuzzard wrote:
Sun Jul 04, 2021 10:07 pm
USB HxC Floppy emulator
HxC vers. 3.7.1.5a
Can you share the files images you are using ?

djbuzzard
Posts: 11
Joined: Sun Jul 04, 2021 2:01 am

Re: E-MU ESI 4000

Post by djbuzzard »

Link to some of the images
https://www.sendspace.com/file/mvvw51

Jeff
Site Admin
Posts: 8092
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: E-MU ESI 4000

Post by Jeff »

djbuzzard wrote:
Wed Jul 07, 2021 1:26 am
Link to some of the images
https://www.sendspace.com/file/mvvw51
Try the attached firmware

(Update procedure : https://hxc2001.com/docs/gotek-floppy-e ... pdate.html )
Attachments
HxCUSBFE.UPD
(80.5 KiB) Downloaded 188 times

djbuzzard
Posts: 11
Joined: Sun Jul 04, 2021 2:01 am

Re: E-MU ESI 4000

Post by djbuzzard »

Jeff,
Thanks...question though...can this update be done from a Mac?
Jeff wrote:
Wed Jul 07, 2021 8:46 am
djbuzzard wrote:
Wed Jul 07, 2021 1:26 am
Link to some of the images
https://www.sendspace.com/file/mvvw51
Try the attached firmware

(Update procedure : https://hxc2001.com/docs/gotek-floppy-e ... pdate.html )

Jeff
Site Admin
Posts: 8092
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: E-MU ESI 4000

Post by Jeff »

Yes you just need to copy the file to the stick. please have a look to the instructions.

djbuzzard
Posts: 11
Joined: Sun Jul 04, 2021 2:01 am

Re: E-MU ESI 4000

Post by djbuzzard »

Updated the firmware to 3.7.4.1 made little better progress with it reading the .img but it fails with a CRC error. Any ideas?

Jeff
Site Admin
Posts: 8092
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: E-MU ESI 4000

Post by Jeff »

djbuzzard wrote:
Sat Jul 10, 2021 11:43 pm
Updated the firmware to 3.7.4.1 made little better progress with it reading the .img but it fails with a CRC error. Any ideas?
At which point did you got the CRC error ?
Have you tried another usb stick ?
Can you share the IMG image you are using ? (you can sent it to hxc2001 at hxc2001 dot com)
Have you tried a HFE file image ?

djbuzzard
Posts: 11
Joined: Sun Jul 04, 2021 2:01 am

Re: E-MU ESI 4000

Post by djbuzzard »

It starts loading the image and fails within a minute.

Jeff
Site Admin
Posts: 8092
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: E-MU ESI 4000

Post by Jeff »

djbuzzard wrote:
Mon Jul 12, 2021 3:19 pm
It starts loading the image and fails within a minute.
Can you send me this image ?

Jeff
Site Admin
Posts: 8092
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: E-MU ESI 4000

Post by Jeff »

(nothing received in my side.)

djbuzzard
Posts: 11
Joined: Sun Jul 04, 2021 2:01 am

Re: E-MU ESI 4000

Post by djbuzzard »


djbuzzard
Posts: 11
Joined: Sun Jul 04, 2021 2:01 am

Re: E-MU ESI 4000

Post by djbuzzard »

Also I just tried these again and they all had a Floppy CRC Error
https://www.dropbox.com/sh/qef0nglwekzs ... tGGsa?dl=0

Jeff
Site Admin
Posts: 8092
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: E-MU ESI 4000

Post by Jeff »

djbuzzard wrote:
Tue Jul 13, 2021 11:47 pm
Also I just tried these again and they all had a Floppy CRC Error
https://www.dropbox.com/sh/qef0nglwekzs ... tGGsa?dl=0
Even the HFE file ?
Can you try to format the HFE image with the machine and send me/share the file even if it fail ?
(Have you a Gotek with an ARTERY or a STM uC ?)

Can you try to load this file ? :
https://hxc2001.com/vrac/ESI_sw_classic_1_img.hfe
(this one was tested successfully on an HxC Gotek and the ESI 4000)

djbuzzard
Posts: 11
Joined: Sun Jul 04, 2021 2:01 am

Re: E-MU ESI 4000

Post by djbuzzard »

Not sure about ARTERY or a STM uC but I tried the file and got a "Missing Address Mark" error. Here's some previous attempts on vid:
https://www.sendspace.com/file/92eelk

Post Reply