E-MU ESI 4000

HxC Floppy emulator support for all others Keyboards/Samplers...
Jeff
Site Admin
Posts: 8092
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: E-MU ESI 4000

Post by Jeff »

djbuzzard wrote:
Thu Jul 15, 2021 2:08 am
Not sure about ARTERY or a STM uC but I tried the file and got a "Missing Address Mark" error. Here's some previous attempts on vid:
https://www.sendspace.com/file/92eelk
odd, very odd.

Can you try to format this image (the one i shared) with the ESI 4000 and share it after this ? (even if the format fail)

Jeff
Site Admin
Posts: 8092
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: E-MU ESI 4000

Post by Jeff »

(i am adding a new function in the firmware to identify which gotek you have exactly)

djbuzzard
Posts: 11
Joined: Sun Jul 04, 2021 2:01 am

Re: E-MU ESI 4000

Post by djbuzzard »

I'm a newbie with this platform. Is there directions somewhere with the steps to format an image using a Mac?

Jeff
Site Admin
Posts: 8092
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: E-MU ESI 4000

Post by Jeff »

djbuzzard wrote:
Thu Jul 15, 2021 2:11 pm
I'm a newbie with this platform. Is there directions somewhere with the steps to format an image using a Mac?
No need to use a Mac, just use the ESI 4000 format feature.

djbuzzard
Posts: 11
Joined: Sun Jul 04, 2021 2:01 am

Re: E-MU ESI 4000

Post by djbuzzard »

All is well now. The seller provided updated ESI files and they are loading correctly. Thanks for the assistance!

Post Reply