Gotek with Korg Trinity, How do I start???

HxC Floppy emulator support for all others Keyboards/Samplers...
Post Reply
Neosynth
Posts: 9
Joined: Sun Apr 30, 2023 10:48 am

Gotek with Korg Trinity, How do I start???

Post by Neosynth »

Hello to everyone,

I recenlty purchased a AT32F435 Gotek to replace a floppy unit from a Korg Trinity,

I've been reading the instructions but it seems a little unclear for me. I've formatted an usb stick with Fat32 system, and put the HXCSDFE.CFG file on root. Then I've read that for Korg you should put the files in IMG format in the same root location as I put the config file in there. I have some library sound files (I think that they have the SNG extension) so I make a IMG file with them, using IMGBURNR converter. Then I put the stick on the unit and powered on the Korg. The gotek seems to read the img because the name of it appeared on the OSD but it gives me the 31 ERROR.

I think that I'm a bit lost. Do I have to flash the unit with any firmware?? Do I have to make the image in some other way?

Thanks in advance.

Jeff
Site Admin
Posts: 8092
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: Gotek with Korg Trinity, How do I start???

Post by Jeff »

Hello,

You probably don't have the HxC firmware installed on this unit.
If you want install it, this can be done from this page :

https://hxc2001.com/store/
https://hxc2001.com/docs/gotek-floppy-e ... ick-method

Neosynth
Posts: 9
Joined: Sun Apr 30, 2023 10:48 am

Re: Gotek with Korg Trinity, How do I start???

Post by Neosynth »

Thank you very much Jeff, I will try what you say.

Best regards Neosynth

Neosynth
Posts: 9
Joined: Sun Apr 30, 2023 10:48 am

Re: Gotek with Korg Trinity, How do I start???

Post by Neosynth »

Hi, I've purchased de firmware and now when I start the unit it appears the message: (c)HxC2001 v5,1,3,1,a so I assume that the flashing and update is well done.
version gotek.JPG
version gotek.JPG (42.48 KiB) Viewed 5760 times
As I've read in some other forums I've configured the unit with System Family as Korg and Interface CFG as IBMPC_HD. Also i've configured it in normal mode and put that config file in the usb stick root (HXCSDFE.CFG).
WhatsApp Image 2023-05-14 at 12.34.12.jpeg
WhatsApp Image 2023-05-14 at 12.34.12.jpeg (39.61 KiB) Viewed 5760 times
version gotek.JPG
version gotek.JPG (42.48 KiB) Viewed 5760 times
I have some triton files in pcg and sng extensions and tried to make an image (*.img) from them as I've read in other posts. And then put them on the root of the usb but nothing happens. It shows the messages:

DSKA0000IMG
T:000/080 S:0

And

DSKA0000IMG
Choose a File

But i try to connect the triton or make selection and nothing seems to happens.

I'm a bit lost, any help will be very gratefully

Thanks in advance
Attachments
WhatsApp Image 2023-05-14 at 12.34.40.jpeg
WhatsApp Image 2023-05-14 at 12.34.40.jpeg (37.22 KiB) Viewed 5760 times

Jeff
Site Admin
Posts: 8092
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: Gotek with Korg Trinity, How do I start???

Post by Jeff »

Hello,

Unpack the files present into this zip file to the usb stick root folder :

https://hxc2001.com/vrac/usbstick.zip

If the trinity shows NO Disk and the Gotek green light is on all the time, please reconnect the ribbon to the other way.

https://hxc2001.com/docs/gotek-floppy-e ... lay_strong

Let me know if this is working.
If not we will try to enable the "Non gated mode". (but this shouldn't be needed on the AT32F435.)

Neosynth
Posts: 9
Joined: Sun Apr 30, 2023 10:48 am

Re: Gotek with Korg Trinity, How do I start???

Post by Neosynth »

Thank you Jeff for your help and reply, I have done as you said.
But the trinity doesn't stay steady green, although it doesn't read anything either.
Please find attached pictures
Attachments
Imagen de WhatsApp 2023-05-14 a las 16.37.452.jpg
Imagen de WhatsApp 2023-05-14 a las 16.37.452.jpg (25.26 KiB) Viewed 5741 times
Imagen de WhatsApp 2023-05-14 a las 16.37.45.jpg
Imagen de WhatsApp 2023-05-14 a las 16.37.45.jpg (24.04 KiB) Viewed 5741 times
Imagen de WhatsApp 2023-05-14 a las 16.37.415.jpg
Imagen de WhatsApp 2023-05-14 a las 16.37.415.jpg (30.01 KiB) Viewed 5741 times

Neosynth
Posts: 9
Joined: Sun Apr 30, 2023 10:48 am

Re: Gotek with Korg Trinity, How do I start???

Post by Neosynth »

I still don't know how to insert files (songs, sequences, etc...) in the trinity.

Thanks
Attachments
Imagen de WhatsApp 2023-05-t14 a las 16.37.45.jpg
Imagen de WhatsApp 2023-05-t14 a las 16.37.45.jpg (92.8 KiB) Viewed 5741 times
Imagen de WhatsApp 2023-05-143 a las 16.46.46.jpg
Imagen de WhatsApp 2023-05-143 a las 16.46.46.jpg (25.72 KiB) Viewed 5741 times

Jeff
Site Admin
Posts: 8092
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: Gotek with Korg Trinity, How do I start???

Post by Jeff »

Neosynth wrote:
Sun May 14, 2023 4:51 pm
I still don't know how to insert files (songs, sequences, etc...) in the trinity.

Thanks
So this seems to work now, isn't it ?

Are you using macOs or Windows or something else ?

On windows you can use a software like winimage.

You can also prepare / format the usb stick to directly add/files to the partitions :
https://hxc2001.com/docs/gotek-floppy-e ... ition.html
(Use gpt_usb_stick_16_1_44M.zip)

Neosynth
Posts: 9
Joined: Sun Apr 30, 2023 10:48 am

Re: Gotek with Korg Trinity, How do I start???

Post by Neosynth »

Ok I think the problem I have now is that I don't know how to set up the usb for trinity to recognise it.

I will try with what you tell me.
But is there a step by step tutorial on how to prepare the usb with the exact programs and formats?
Thanks Jeff

Neosynth
Posts: 9
Joined: Sun Apr 30, 2023 10:48 am

Re: Gotek with Korg Trinity, How do I start???

Post by Neosynth »

Thanks Jeff , following the instructions I was able to create the USB for Trinity!!!

I used Rufus and it worked the first time.

The maximum .IMG partition size of 1.44MB is 16 parts, isn't it?

I ask this because the key is 32GB.... to take advantage of its capacity.

Thanks! Best regards

Jeff
Site Admin
Posts: 8092
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: Gotek with Korg Trinity, How do I start???

Post by Jeff »

Neosynth wrote:
Tue May 16, 2023 9:14 pm
Thanks Jeff , following the instructions I was able to create the USB for Trinity!!!

I used Rufus and it worked the first time.

The maximum .IMG partition size of 1.44MB is 16 parts, isn't it?

I ask this because the key is 32GB.... to take advantage of its capacity.

Thanks! Best regards
it is possible to add 128 partitions to the disk but i really don't recommend this because most operating systems don't behave very well with so much partitions.

You can also use files images but then you to use a software edit the images content.

Neosynth
Posts: 9
Joined: Sun Apr 30, 2023 10:48 am

Re: Gotek with Korg Trinity, How do I start???

Post by Neosynth »

Ok perfect!!!

One last thing... the OLED screen is upside down.
I suppose there is a way to turn it upside down, right?
I guess some menu option, but I can't find it.
Thanks

Jeff
Site Admin
Posts: 8092
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: Gotek with Korg Trinity, How do I start???

Post by Jeff »

Neosynth wrote:
Mon May 22, 2023 4:22 pm
Ok perfect!!!

One last thing... the OLED screen is upside down.
I suppose there is a way to turn it upside down, right?
I guess some menu option, but I can't find it.
Thanks
You need to update to one "U100LQD" firmware. See the archive :

https://hxc2001.com/download/floppy_dri ... rmware.zip

https://hxc2001.com/docs/gotek-floppy-e ... pdate.html

Neosynth
Posts: 9
Joined: Sun Apr 30, 2023 10:48 am

Re: Gotek with Korg Trinity, How do I start???

Post by Neosynth »

Thank you very much Jeff!!! I've got it perfect.

Eternally grateful for the help :D :D :D

Post Reply