Create boot disk for ASR-88 for a SFR1M44-U100K unit with USB Pendrive

HxC Floppy Emulator Ensoniq Keyboards/Samplers support
Post Reply
ccubillos
Posts: 1
Joined: Thu Jul 09, 2020 12:49 am

Create boot disk for ASR-88 for a SFR1M44-U100K unit with USB Pendrive

Post by ccubillos »

Hi my friends,
I need your help, I'm just about to buy this device to emulate a severals floppy disks in my ASR-88:

https://es.aliexpress.com/item/32971657 ... 2e0e9OjHFS

Also donwloaded the imagen for ASR-10 OS which is: DSKA0005.HFE, and 2 program;
- HxCFloppyEmulator_Software
- Batch Manage Tool v1.40

Then I've formated with batch manager a 2 gigas USB Pendrive and got severals volumens of 1.44

Finally with HxCFloppyEmulator.exe I did loaded the DSKA0005.HFE file but cannot put it on the USB Drive due the image size is 3megas and the USB now has 1.44 mega size

So what are the step to put the OS in the pendrive and the boot from my keyboard (I've read lot's of post but still can't figure out which are the steps to do it)

Thanks you very much for your help!
Regards
Cristian

Jeff
Site Admin
Posts: 8092
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: Create boot disk for ASR-88 for a SFR1M44-U100K unit with USB Pendrive

Post by Jeff »

You need to install the HxC firmware : https://hxc2001.com/store/index.html

Post Reply