Ensoniq Mirage -- Write to IMG unsupported

HxC Floppy Emulator Ensoniq Keyboards/Samplers support
Post Reply
mondo1976
Posts: 156
Joined: Mon Dec 28, 2015 3:54 pm

Ensoniq Mirage -- Write to IMG unsupported

Post by mondo1976 »

It is my understanding the raw IMG is read/write supported on newer firmware, yet I have a Mirage which can read from IMG yet only HFE is read/write. I know that IMG is read/write under other Ensoniq models such as the EPS16.

The internal configuration on the Gotek/HxC is set to "write enabled", and the FAT permissions for the IMG file is not read-only. Again, the HFE can be written to, so this should not be a configuration issue, and it cannot be a file attributes issue either.

It shouldn't be an issue of unknown geometry either because the IMG can be read just fine. So why no write support?

Jeff
Site Admin
Posts: 8092
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: Ensoniq Mirage -- Write to IMG unsupported

Post by Jeff »

Indeed write is supported for the Ensoniq Mirage too.

Post Reply