I have a Gotek programmed with HXC firmware HXCFEUSB_V3_1_23_1a.upd
I'm running in Normal mode - and the OS loads without having to Rename the HFE files like this : DSKA0000.HFE
As I am not running in index mode.
So I copied the files directly from QuickInstall_FloppyDiskImages - All works fine
Apart from one thing, there are some sound files included in SDHxCFE_Ensoniq_EPS.zip
CLARINET.hfe
ORGAN-V1.hfe
STRINGS.hfe
SYNBASS-.hfe
TRUMPET.hfe
TRUMPVAR.hfe
WOODFLUT.hfe
WOODWIND.hfe
Try as I might I cannot find anyway to load these - Any help would be appreciated as currently I have no sound library at all.
Loading these would give me a head start.
Getting Sound files to load from QuickInstall_FloppyDiskImage
Re: Getting Sound files to load from QuickInstall_FloppyDiskImage
I am not sure to understand the issue : You can't select the image on the emulator or have you a problem when trying to load it on the synth ?
Which synth have you ?
Which synth have you ?
Re: Getting Sound files to load from QuickInstall_FloppyDiskImage
Sorry - it's for the Ensoniq EPS 16+ ... I can't see them from load window of the EPS -they just don't show up ... but they are on the USB stick
Re: Getting Sound files to load from QuickInstall_FloppyDiskImage
So you are probably in indexed mode. Remove the CFG file from the stick.
Re: Getting Sound files to load from QuickInstall_FloppyDiskImage
Hi Jeff, removed the CFG file - still couldn't get them to work
but I did get WBOY101.hfe & WBOY103.hfe to work
perhaps the sound files that wont show up are for the EPS classic ?
Any way not to worry I have few sounds to play with now.
but I did get WBOY101.hfe & WBOY103.hfe to work
perhaps the sound files that wont show up are for the EPS classic ?
Any way not to worry I have few sounds to play with now.