Shugart jumper settings for Drive A ID1

HxC Floppy Emulator E-mu Emulator I & II support
Post Reply
jbfairlight
Posts: 41
Joined: Sun Feb 17, 2008 10:22 pm
Location: Ile de France
Contact:

Shugart jumper settings for Drive A ID1

Post by jbfairlight »

How set the HxC jumper settings for 1 drive = ID1 in Shugart emulation ?

is useful for copying toolds disks like (OS's, memory test, scanner test, sounds test) :wink:

I want to boot from a floppy 5.25 "(utilities) and to allow copying to the drive HxC...

It's easy to read floppy disks image if the HxC is the second drive, but it's impossible to write or format the same image disk :?

Jeff
Site Admin
Posts: 8092
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: Shugart jumper settings for Drive A ID1

Post by Jeff »

jbfairlight wrote:How set the HxC jumper settings for 1 drive = ID1 in Shugart emulation ?

is useful for copying toolds disks like (OS's, memory test, scanner test, sounds test) :wink:

I want to boot from a floppy 5.25 "(utilities) and to allow copying to the drive HxC...

It's easy to read floppy disks image if the HxC is the second drive, but it's impossible to write or format the same image disk :?
on which image are you trying to write ?
Can you write to the HxC when it set to ID0 (first drive) ?
What is your jumper setting ?

Post Reply