Hi everybody
I recently bought a gotek usb drive, flashed with HXC firmware and I installed it in my EII instead of the 5.25 drive.
I use a 32 MO usb stick, formatted in fat32.
I use the the "indexed mode " CFG config file found on the hxc web site and the 3.1 os image provided by hxc here :
https://hxc2001.com/download/floppy_driv ... Images.zip
I renamed the OS file as DSKA0000.HFE
The gotek hxc drive says HXC, then goes to 000 and he usb stick led flashes fast, but my EII keeps saying "***Emulator II*** Boot in progress"...
What did I do wrong?
thanx for helping
Cheers to you all !
gotek hxc on EMu II
Re: gotek hxc on EMu II
Just curious : did you buy it already flashed with the hxc firmware or did you have to DIY?
Re: gotek hxc on EMu II
Is it a dual-drive setup?
My point is that the Gotek and an additional floppy has to be set to either DS0 or DS1 appropriately.
My point is that the Gotek and an additional floppy has to be set to either DS0 or DS1 appropriately.
Re: gotek hxc on EMu II
Any news? Because I'm planning to buy an hxc-flashed Gotek for my EII as well...
Re: gotek hxc on EMu II
SP1200 write support fix (data write, not format !):
https://hxc2001.com/download/floppy_driv ... rmware.zip
https://hxc2001.com/download/floppy_driv ... _notes.txt
This may also solve the same issue with Emu machines.
https://hxc2001.com/download/floppy_driv ... rmware.zip
https://hxc2001.com/download/floppy_driv ... _notes.txt
This may also solve the same issue with Emu machines.