gotek hxc on EMu II

[eddyemma]

Hi everybody

I recently bought a gotek usb drive, flashed with HXC firmware and I installed it in my EII instead of the 5.25 drive.

I use a 32 MO usb stick, formatted in fat32.

I use the the "indexed mode " CFG config file found on the hxc web site and the 3.1 os image provided by hxc here :
https://hxc2001.com/download/floppy_driv ... Images.zip

I renamed the OS file as DSKA0000.HFE

The gotek hxc drive says HXC, then goes to 000 and he usb stick led flashes fast, but my EII keeps saying "***Emulator II*** Boot in progress"...

What did I do wrong?
thanx for helping
Cheers to you all !

[mocheez]

Just curious : did you buy it already flashed with the hxc firmware or did you have to DIY?

[mondo1976]

Is it a dual-drive setup?

My point is that the Gotek and an additional floppy has to be set to either DS0 or DS1 appropriately.

[mocheez]

Any news? Because I'm planning to buy an hxc-flashed Gotek for my EII as well...

[Jeff]

SP1200 write support fix (data write, not format !):
https://hxc2001.com/download/floppy_driv ... rmware.zip

https://hxc2001.com/download/floppy_driv ... _notes.txt

This may also solve the same issue with Emu machines.