New Floppy Cable advice

HxC Floppy Emulator E-mu Emulator I & II support
Post Reply
Synth boy
Posts: 7
Joined: Wed Jun 10, 2015 10:26 am

New Floppy Cable advice

Post by Synth boy » Fri Jun 12, 2015 10:41 am


I have been advised that I need a new floppy cable to get a HxC working in Oberheim DPX-1. Could somebody please advise me what floppy cable would be suitable.


Site Admin
Posts: 6981
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris

Re: New Floppy Cable advice

Post by Jeff » Mon Jun 29, 2015 8:40 am

the old one is fine i think.

Posts: 26
Joined: Fri Jul 11, 2014 9:55 pm

Re: New Floppy Cable advice

Post by swissdoc » Sat Aug 15, 2015 1:55 am

Original cable is fine, just make sure you have the connector turned when connecting to HxC, so the red line is lining up with pin 1 on the connector. They did lot of cable twisting and mixing in DPX-1. On the power they mixed colors red an yellow, but the connectors have to correct power at the right places.

Post Reply