Upgrade to EOS4.70 from 4.02 using GOTEK

HxC Floppy Emulator E-mu Emulator I & II support
Post Reply
AANTONIR
Posts: 1
Joined: Sun Sep 12, 2021 6:24 am

Upgrade to EOS4.70 from 4.02 using GOTEK

Post by AANTONIR »

Hi there
Was hoping someone here would be able to assist.
I have recently installed a new GOTEX FDD emulator in my E-MU Ultra E5000.
The sampler came with EOS4.02 and I would like to upgrade to EOS4.70.
Have downloaded the disk images (HFE format), formatted a new USB key with FAT32, uploaded the E0S4.70 HFE image to the root directory and plugged onto the GOTEK drive in the sampler.
I can see the file on the OLED screen but the sampler is not botting into upgrade mode nor recognise the content on the USB key ("unknown file format" error).
Has anyone completed the upgrade successfully and if so, could you provide some clear instructions how this can be achieved ??

Thank you all in advance !

Jeff
Site Admin
Posts: 7692
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: Upgrade to EOS4.70 from 4.02 using GOTEK

Post by Jeff »

Is the HxC firmware installed on this Gotek ?

Post Reply