PREORDERING OF REV C

General information and announcements - please read it first before posting.
Post Reply
lotharek
Posts: 180
Joined: Fri Nov 13, 2009 9:35 am
Location: Poland
Contact:

PREORDERING OF REV C

Post by lotharek »

Hello Everyone,

just to inform You :

PREORDERING OF REV C (with amiga writes supoort) starts TODAY !!!

www.lotharek.pl



regards, lotharek
..... Atari Roxxx !!!

lotharek
Posts: 180
Joined: Fri Nov 13, 2009 9:35 am
Location: Poland
Contact:

Re: PREORDERING OF REV C

Post by lotharek »

PCBS :-)


Image
..... Atari Roxxx !!!

lotharek
Posts: 180
Joined: Fri Nov 13, 2009 9:35 am
Location: Poland
Contact:

Re: PREORDERING OF REV C

Post by lotharek »

WORKING REV C !!!!




Image
..... Atari Roxxx !!!

lotharek
Posts: 180
Joined: Fri Nov 13, 2009 9:35 am
Location: Poland
Contact:

Re: PREORDERING OF REV C

Post by lotharek »

I really need change in my life sth....what a mess...




Image
..... Atari Roxxx !!!

Esynthesist
Posts: 11
Joined: Mon Oct 04, 2010 11:21 pm

Post by Esynthesist »

Nice !

Can I ask a question though: what kind of 34-pin connector are you using on this REV C board: one with pins facing the top of the board, or one with pins facing the back of the board (like most floppy drives, in an angle of 90 degrees with the PCB) ?
I think the "mechanical" compatibility as a replacement unit for a floppy drive would be best if the 90 degree angle would be used...
Or do customers have a choice :) ?

Greg.0
Posts: 14
Joined: Tue Feb 23, 2010 11:19 am
Location: Lorraine

Post by Greg.0 »

Hi Lotharek,

I thought I had more time and I missed the end of the auction for pre-order the revision C.
Is it still possible to pre order?

lotharek
Posts: 180
Joined: Fri Nov 13, 2009 9:35 am
Location: Poland
Contact:

Post by lotharek »

of course. new auction on EBAY, my online shop - soon new www
..... Atari Roxxx !!!

p@rity
Posts: 8
Joined: Mon Sep 06, 2010 6:22 pm

Post by p@rity »

As a heads-up... I went to the Lotharek webstore and placed one SD Emulator in my basket. When I changed the currency conversion from Euro, which was 75 Euro, to USD (US Dollar?), the amount changed to 37 USD instead of about 105 USD, which I thought was a bit odd... You may want to check if this is alright.

The country could not be selected, so no harm done (yet) I suppose.

lotharek
Posts: 180
Joined: Fri Nov 13, 2009 9:35 am
Location: Poland
Contact:

Post by lotharek »

I`m still working with www.lotharek.pl


menawhile try :

www.mmj.pl/~lotharek/atari
..... Atari Roxxx !!!

lotharek
Posts: 180
Joined: Fri Nov 13, 2009 9:35 am
Location: Poland
Contact:

Post by lotharek »

lotharek wrote:I`m still working with www.lotharek.pl


menawhile try :

www.mmj.pl/~lotharek/atari

EDIT:

Old page - html shitty style is dead ! new is present !
..... Atari Roxxx !!!

Jeff
Site Admin
Posts: 7592
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Post by Jeff »

lotharek wrote:
lotharek wrote:I`m still working with www.lotharek.pl


menawhile try :

www.mmj.pl/~lotharek/atari

EDIT:

Old page - html shitty style is dead ! new is present !
Add a redirection page to the new one !!!

lotharek
Posts: 180
Joined: Fri Nov 13, 2009 9:35 am
Location: Poland
Contact:

Post by lotharek »

Ok,

any idea of html code that redirects without clicking to new link ??
..... Atari Roxxx !!!

Jeff
Site Admin
Posts: 7592
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Post by Jeff »

lotharek wrote:Ok,

any idea of html code that redirects without clicking to new link ??
It seems you have found ;-).

p@rity
Posts: 8
Joined: Mon Sep 06, 2010 6:22 pm

Post by p@rity »

It looks like you resolved the currency conversion as well... Sticking with just Euros is probably easiest. :)

I completed my order on the old store's page a few days ago. Thanks!

Esynthesist
Posts: 11
Joined: Mon Oct 04, 2010 11:21 pm

Post by Esynthesist »

Lotharek,
Just to know: has shipping of the device already started ?
(I ordered in the beginning of october...)

Post Reply