Hi,
I have problem with Hxc on my machine. IT would be offset printing machine.
I'd tried to install this hardware replacing from an old Floppy disk.
Only I got serious problem. The led indicator (right side) always lid, either there is any SD card inserted or not.
.
I can select and choose FDD image (*.hfe), only the led still lit.
Please kindly support to get the problem gone.
Any help would be appreciated.
Sorry if my english is broken. I got bad TOEFL.
Regards,
Ruri
HxC on offset printer machine
Re: HxC on offset printer machine
Try to connect the floppy cable to the other way (colored wire to the other side).
and please give me more elements :
-> Old disk drive brand and model ?
-> Machine brand and model ?
-> Does this machine use "dos"/fat12/"readable by a computer" floppies ?
please post some Pictures of the machine and the old floppy disk drive.
and please give me more elements :
-> Old disk drive brand and model ?
-> Machine brand and model ?
-> Does this machine use "dos"/fat12/"readable by a computer" floppies ?
please post some Pictures of the machine and the old floppy disk drive.
Re: HxC on offset printer machine
My machine is an offsetpress printer "Komori Lithrone 40", using an TEAC FD 235hg c497.
If I flipped the data cable (plug the colored wire on the other side), are they won't be affecting any other part of the machine ?
AFAIK, one row of the pin header is for ground, and other is for data/command/status signal. If we tried to flipped the connection, they would be missconnection on wiring. CMIIW.
Regards,
Ruri
Yes, they use FAT12. When I tried to saved any machine configuration to FDD, I can read them on my PC. They would be saved as txt file.If I flipped the data cable (plug the colored wire on the other side), are they won't be affecting any other part of the machine ?
AFAIK, one row of the pin header is for ground, and other is for data/command/status signal. If we tried to flipped the connection, they would be missconnection on wiring. CMIIW.
Regards,
Ruri
Re: HxC on offset printer machine
I need to see the jumpers of the drive !
Re: HxC on offset printer machine
Here is the pict of FDD jumper,
Hopefully it can help.
Regards,
Ruri
Hopefully it can help.
Regards,
Ruri
Re: HxC on offset printer machine
Reconnect the floppy cable as you did in the first time , and try to change the interface mode :
-> remove the sd,
-> press the button "select"
-> Interface cfg
-> shugart.
-> exit
-> remove the sd,
-> press the button "select"
-> Interface cfg
-> shugart.
-> exit
Re: HxC on offset printer machine
I have tried to select 'shugart' and anything left read from HFE, it doesn't worked. Both led still lit.
What about Dip switch configuration (ID0A-ID3A,ID0B-ID3B) ?
What about Dip switch configuration (ID0A-ID3A,ID0B-ID3B) ?
Re: HxC on offset printer machine
Did you see S:0 or S:1 at the second line ?ruri wrote:I have tried to select 'shugart' and anything left read from HFE, it doesn't worked. Both led still lit.
What about Dip switch configuration (ID0A-ID3A,ID0B-ID3B) ?
Re: HxC on offset printer machine
Yes, I see S:0 only on bottom right side of the display.
Does it means something ?
Does it means something ?
Re: HxC on offset printer machine
Have a look to your email, there is something to try.ruri wrote:Yes, I see S:0 only on bottom right side of the display.
Does it means something ?