I have a problem that I can not solve. it is an import samples into my akai. I also tried akai prepared image from S900blogspot but writes unformatted. if I try to format the card so nothing happens is still unformatted. What is the correct procedure?
But if I use a file from Jandoe file is uploaded. Sorry for my bad English.
Can you give a link to the S900blogspot images ?
i find this on page 5 i thing that is same files
Downloaded an "known to work" Image from an blog (http://akai-s900.blogspot.com/2008/01/h
Converted it with the HCX Tool, and no Luck at all.
Again: Bad data from Disk.
OT.: Orderd an LED LCD several Minutes Ago. *Happy Happy Joy Joy*
I Will post picutres when this Baby will be finished...
I have checked the file image : no problem.
So there are 2 possibilities :
->The SDCard too slow : little chance since you using a DD file image (low bitrate)
-> You miss the Akai pull-up patch. Can you check your modification? Can you try a 1K ohms resistor ?
it possible that i have bad rezistors or bad (slow) SD card ?
thanks for your reply!