HxC Floppy Drive Emulator

HxC Floppy Drive Emulator general information and news
It is currently Fri May 24, 2013 10:27 pm

Board index » General » General Discussion

All times are UTC + 2 hours




Post new topic Reply to topic  Page 1 of 1
  [ 14 posts ] 
  Previous topic | Next topic 
Author Message
mau_rizio
 Post subject: hfe to dsk
PostPosted: Tue Nov 30, 2010 7:17 pm 
Offline

Joined: Tue May 05, 2009 5:08 pm
Posts: 69
Is it possible to convert back hfe files to dsk (msx or pc)?
Top
 Profile  
 
Jeff
 Post subject: Re: hfe to dsk
PostPosted: Tue Nov 30, 2010 9:01 pm 
Offline
Site Admin

Joined: Fri Oct 20, 2006 12:12 am
Posts: 2844
Location: Paris
mau_rizio wrote:
Is it possible to convert back hfe files to dsk (msx or pc)?


Yes in same manner you convert dsk to hfe . :wink:
Top
 Profile  
 
mau_rizio
 Post subject: Re: hfe to dsk
PostPosted: Wed Dec 01, 2010 12:49 am 
Offline

Joined: Tue May 05, 2009 5:08 pm
Posts: 69
Jeff wrote:
mau_rizio wrote:
Is it possible to convert back hfe files to dsk (msx or pc)?


Yes in same manner you convert dsk to hfe . :wink:


Yes but when i click on export there are hfe, vtr, mfm, afi, img, cpc dsk and imd.

i've tried with cpc dsk, but it did not work on a dsk manager for windows.

Perhapse i'm doing it in the wrong way, please explain :)

thak you.
Top
 Profile  
 
Jeff
 Post subject: Re: hfe to dsk
PostPosted: Wed Dec 01, 2010 8:15 am 
Offline
Site Admin

Joined: Fri Oct 20, 2006 12:12 am
Posts: 2844
Location: Paris
mau_rizio wrote:
Jeff wrote:
mau_rizio wrote:
Is it possible to convert back hfe files to dsk (msx or pc)?


Yes in same manner you convert dsk to hfe . :wink:


Yes but when i click on export there are hfe, vtr, mfm, afi, img, cpc dsk and imd.

i've tried with cpc dsk, but it did not work on a dsk manager for windows.

Perhapse i'm doing it in the wrong way, please explain :)

thak you.



What doesn't work?
Top
 Profile  
 
mau_rizio
 Post subject: Re: hfe to dsk
PostPosted: Wed Dec 01, 2010 10:20 am 
Offline

Joined: Tue May 05, 2009 5:08 pm
Posts: 69
Jeff wrote:
mau_rizio wrote:
Jeff wrote:
mau_rizio wrote:
Is it possible to convert back hfe files to dsk (msx or pc)?


Yes in same manner you convert dsk to hfe . :wink:


Yes but when i click on export there are hfe, vtr, mfm, afi, img, cpc dsk and imd.

i've tried with cpc dsk, but it did not work on a dsk manager for windows.

Perhapse i'm doing it in the wrong way, please explain :)

thak you.



What doesn't work?


I cannot open the dsk image exported using the cpc dsk format.
Wich format i have to use? Same question for the ms-dos disks.
Top
 Profile  
 
Jeff
 Post subject: Re: hfe to dsk
PostPosted: Wed Dec 01, 2010 10:48 am 
Offline
Site Admin

Joined: Fri Oct 20, 2006 12:12 am
Posts: 2844
Location: Paris
mau_rizio wrote:
Jeff wrote:
mau_rizio wrote:
Jeff wrote:
mau_rizio wrote:
Is it possible to convert back hfe files to dsk (msx or pc)?


Yes in same manner you convert dsk to hfe . :wink:


Yes but when i click on export there are hfe, vtr, mfm, afi, img, cpc dsk and imd.

i've tried with cpc dsk, but it did not work on a dsk manager for windows.

Perhapse i'm doing it in the wrong way, please explain :)

thak you.



What doesn't work?


I cannot open the dsk image exported using the cpc dsk format.
Wich format i have to use? Same question for the ms-dos disks.


more details please :
<<I cannot open the dsk...>>
open with what ?
Top
 Profile  
 
mau_rizio
 Post subject: Re: hfe to dsk
PostPosted: Wed Dec 01, 2010 11:10 am 
Offline

Joined: Tue May 05, 2009 5:08 pm
Posts: 69
Jeff wrote:
mau_rizio wrote:
Jeff wrote:
mau_rizio wrote:
Jeff wrote:
mau_rizio wrote:
Is it possible to convert back hfe files to dsk (msx or pc)?


Yes in same manner you convert dsk to hfe . :wink:


Yes but when i click on export there are hfe, vtr, mfm, afi, img, cpc dsk and imd.

i've tried with cpc dsk, but it did not work on a dsk manager for windows.

Perhapse i'm doing it in the wrong way, please explain :)

thak you.



What doesn't work?


I cannot open the dsk image exported using the cpc dsk format.
Wich format i have to use? Same question for the ms-dos disks.


more details please :
<<I cannot open the dsk...>>
open with what ?


I'm using two programs for windows:
Disk Manager - http://www.lexlechz.at/en/software.html
Disk Explorer - http://hp.vector.co.jp/authors/VA013937 ... dex_e.html

But tell me wich file type i've to use when i click on Export.
Top
 Profile  
 
Jeff
 Post subject: Re: hfe to dsk
PostPosted: Wed Dec 01, 2010 11:39 am 
Offline
Site Admin

Joined: Fri Oct 20, 2006 12:12 am
Posts: 2844
Location: Paris
mau_rizio wrote:
Jeff wrote:
more details please :
<<I cannot open the dsk...>>
open with what ?


I'm using two programs for windows:
Disk Manager - http://www.lexlechz.at/en/software.html
Disk Explorer - http://hp.vector.co.jp/authors/VA013937 ... dex_e.html

But tell me wich file type i've to use when i click on Export.


Ok so we are not talking about CPC disk tools ;-)

just export as "IMG file (RAW Sector file format)"
Top
 Profile  
 
mau_rizio
 Post subject: Re: hfe to dsk
PostPosted: Wed Dec 01, 2010 4:36 pm 
Offline

Joined: Tue May 05, 2009 5:08 pm
Posts: 69
Jeff wrote:
mau_rizio wrote:
Jeff wrote:
more details please :
<<I cannot open the dsk...>>
open with what ?


I'm using two programs for windows:
Disk Manager - http://www.lexlechz.at/en/software.html
Disk Explorer - http://hp.vector.co.jp/authors/VA013937 ... dex_e.html

But tell me wich file type i've to use when i click on Export.


Ok so we are not talking about CPC disk tools ;-)

Exactly, we were talking about msx dsk, i was using cpc dsk beacuse it's the only dsk type available for export.

Quote:
just export as "IMG file (RAW Sector file format)"

Yes this works :)

This is the same for ms-dos images and amiga images?
Top
 Profile  
 
Jeff
 Post subject: Re: hfe to dsk
PostPosted: Wed Dec 01, 2010 9:06 pm 
Offline
Site Admin

Joined: Fri Oct 20, 2006 12:12 am
Posts: 2844
Location: Paris
mau_rizio wrote:
Quote:
just export as "IMG file (RAW Sector file format)"

Yes this works :)

This is the same for ms-dos images and amiga images?


Yes exactly. For amiga just rename the .IMG into .ADF after conversion.
Top
 Profile  
 
mau_rizio
 Post subject: Re: hfe to dsk
PostPosted: Wed Dec 01, 2010 11:47 pm 
Offline

Joined: Tue May 05, 2009 5:08 pm
Posts: 69
Jeff wrote:
mau_rizio wrote:
Quote:
just export as "IMG file (RAW Sector file format)"

Yes this works :)

This is the same for ms-dos images and amiga images?


Yes exactly. For amiga just rename the .IMG into .ADF after conversion.


Ok, thank you.
Top
 Profile  
 
Pedro48
 Post subject: Re: hfe to dsk
PostPosted: Sun Apr 22, 2012 2:08 pm 
Offline

Joined: Sun Apr 22, 2012 5:03 am
Posts: 2
Hi folks,

I have a similar query. Using the floppy emulator for a TRS-80 model 4, so far so good , convert all DSK (JV1,JV3) images to .HFE no problem , can read and write from the emulator. When I try and convert the .HFE back to a DSK( JV1,JV3), can't seem to make this work. Have tried each of the file formats, none work, and even save as .IMG and rename .. still no work.

Using Matthew Reed TRS32 software to read images, works fine with the original, will not open the converted .HFE

Any help much appreciated ..

Peter
Top
 Profile  
 
Jeff
 Post subject: Re: hfe to dsk
PostPosted: Sun Apr 22, 2012 2:58 pm 
Offline
Site Admin

Joined: Fri Oct 20, 2006 12:12 am
Posts: 2844
Location: Paris
Pedro48 wrote:
Hi folks,

I have a similar query. Using the floppy emulator for a TRS-80 model 4, so far so good , convert all DSK (JV1,JV3) images to .HFE no problem , can read and write from the emulator. When I try and convert the .HFE back to a DSK( JV1,JV3), can't seem to make this work. Have tried each of the file formats, none work, and even save as .IMG and rename .. still no work.

Using Matthew Reed TRS32 software to read images, works fine with the original, will not open the converted .HFE

Any help much appreciated ..

Peter


Hi,

JV1/JV3/DMK export is planned. Stay tuned !
Top
 Profile  
 
Pedro48
 Post subject: Re: hfe to dsk
PostPosted: Tue Oct 30, 2012 9:08 pm 
Offline

Joined: Sun Apr 22, 2012 5:03 am
Posts: 2
H Jeff,

Has there been any update for the JV1/JV3/DMK export ....

thanks...
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 14 posts ] 

Board index » General » General Discussion

All times are UTC + 2 hours


Who is online

Users browsing this forum: bogdanad and 2 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group