I've got an HxC-flashed Gotek fitted internally on an Atari ST. It's using the Autoboot_mode CFG file with the Atari ST File selector.
HxC Firmware version 184.108.40.206a, Selector v1.89a
Games load and run absolutely fine, but I can consistently break the setup by doing the following:
- Boot into the File Selector
- Hit F3 to go into the settings menu
- Turn on Eject at Power On
- Exit settings menu
- Hit F9 to save
- Power off/on the system
If I plug the USB drive into my computer and replace the HXCSDFE.CFG file with the original download, it then works correctly.
I've replicated this several flash drives, old and brand-new; generic and branded.
All files obtained from the HXCFEUSB_V3_1_23_1a beta firmware download ZIP.
Not sure if this is a known issue with the beta, but I'll try next with the WIP-version Selector and Firmware and report back.