Thank you for the help!Kingstener wrote:ooh, it looks strange...
- 0.91" OLED 128x32 with SSD1306 driver ?
- Fuses from readme?
- R/C on reset 1000nF/27K? (if it is a SPI display)
- VCC 3,3V ?
Swap of SCL / SDA brings nothing to fry
i ordered 128x32 OLED... i am not sure the chinese store send me a 128x64 instead...
fuses ok, i2c one, but.... i used 5v for VCC, since i swapped for testing the OLED with the LCD display!!!
May be it's the overvoltage had fried the oled...