from pc on machine

HxC Floppy Emulator on IBM PC and compatible support
Post Reply
murhub
Posts: 2
Joined: Tue Oct 02, 2012 2:44 pm

from pc on machine

Post by murhub »

good day
on PC all OK
but
1) if i install on machine
HL3 is alight
HL1 and HL2 not on
but display is off

2) if on machine turn on process read or write
HL3 and HL1 is alight
HL2 is off
display is on but emulator do not see SD card

we can’t choose images
signal is difference between pc and machine on 2 pin on connectors
what we can do
best regards

Jeff
Site Admin
Posts: 8092
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: from pc on machine

Post by Jeff »

murhub wrote:good day
on PC all OK
but
1) if i install on machine
HL3 is alight
HL1 and HL2 not on
but display is off

2) if on machine turn on process read or write
HL3 and HL1 is alight
HL2 is off
display is on but emulator do not see SD card

we can’t choose images
signal is difference between pc and machine on 2 pin on connectors
what we can do
best regards
Hi,

Which machine are you using exactly ? What do you mean by "HL1 / HL2 / HL3" ?

murhub
Posts: 2
Joined: Tue Oct 02, 2012 2:44 pm

Re: from pc on machine

Post by murhub »

OK i did all machine is Jumberca for knitting
provided to be machine not give power if do not use process read or write
we make separately power 5V on connectors and all work ))))
very good emulator ))))) thanks
topic is closed

p. s. sorry for my English ))))))

Post Reply