Problem with msdos image
Problem with msdos image
I've created an images for a msdos floppy.
When i try to copy files form the images to the hd, after some files i got an error like "error reading data from drive A - INT24 failed"
To create the image i used:
Create fs floppy
Selected 1.44MB MS DOS FAT12
Select the directory named pas16inst
Export
I'm making something wrong?
PS: Installation from the files copied to a real floppy disk is working.
When i try to copy files form the images to the hd, after some files i got an error like "error reading data from drive A - INT24 failed"
To create the image i used:
Create fs floppy
Selected 1.44MB MS DOS FAT12
Select the directory named pas16inst
Export
I'm making something wrong?
PS: Installation from the files copied to a real floppy disk is working.
Re: Problem with msdos image
mau_rizio wrote:I've created an images for a msdos floppy.
When i try to copy files form the images to the hd, after some files i got an error like "error reading data from drive A - INT24 failed"
To create the image i used:
Create fs floppy
Selected 1.44MB MS DOS FAT12
Select the directory named pas16inst
Export
I'm making something wrong?
PS: Installation from the files copied to a real floppy disk is working.
Send me the hfe file, i will have a look.
mau_rizio wrote:Same problems under windows xp.
If i try to open an empty 1,44 image, after a long time reading sector 0 and 1, windows says "disk is not formatted. format it?"
Have you received my image, xxx.hfe?
Hi,
I have tried your HFE file, and there are no problem at with it.
What is your board revision ? B or C ?
Can you try another SDCard (another brand/model).
It's revision B.Jeff wrote:mau_rizio wrote:Same problems under windows xp.
If i try to open an empty 1,44 image, after a long time reading sector 0 and 1, windows says "disk is not formatted. format it?"
Have you received my image, xxx.hfe?
Hi,
I have tried your HFE file, and there are no problem at with it.
What is your board revision ? B or C ?
I'm using SanDisk 4gb sdhc, tested two of them, same problem on both.Can you try another SDCard (another brand/model).
Then i tested a SanDisk 128Mb and a Nokia 1Gb both of them works well, reading and writing the images
But i'm sure i used the 4gb sd on the amiga and on the msx without any problem.
Unfortunatly i have not any other 4gb sd card to test, but there are known problems with certain sd cards?
There two possible cause for this issue:mau_rizio wrote:It's revision B.Jeff wrote:mau_rizio wrote:Same problems under windows xp.
If i try to open an empty 1,44 image, after a long time reading sector 0 and 1, windows says "disk is not formatted. format it?"
Have you received my image, xxx.hfe?
Hi,
I have tried your HFE file, and there are no problem at with it.
What is your board revision ? B or C ?
I'm using SanDisk 4gb sdhc, tested two of them, same problem on both.Can you try another SDCard (another brand/model).
Then i tested a SanDisk 128Mb and a Nokia 1Gb both of them works well, reading and writing the images
But i'm sure i used the 4gb sd on the amiga and on the msx without any problem.
Unfortunatly i have not any other 4gb sd card to test, but there are known problems with certain sd cards?
let's try to correct the first one:
Add a 1800 ohms (1.8Kohms) resistor in parrallel of R28 (between pin 1 & 2 of U11 for example) to increase a little the sdcard voltage.
Can you do this ?
( you can find the schematic here : https://hxc2001.com/floppy_drive_emulat ... or_Kit.zip )
ok so please try this firmware :mau_rizio wrote:Tested on the rev. C, same problem.
https://hxc2001.com/floppy_drive_emulat ... 3_0_5B.UPD