HxC Floppy Emulator on IBM PC and compatible support
Jeff
Site Admin
Posts: 8093 Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:
Post
by Jeff » Mon Dec 13, 2010 12:13 am
Yes and where did you connect the hxc ?
reminder:
If non-twisted floppy "connector" of the cable:
A: -> ID2
B: -> ID1
If twisted floppy "connector" of the cable:
A: -> ID1
B: -> ID2
mau_rizio
Posts: 69 Joined: Tue May 05, 2009 5:08 pm
Post
by mau_rizio » Mon Dec 13, 2010 12:21 am
Connected to the last connector, the one after the twist.
The red wire is on the right near the id jumpers.
If i set ID2, the bios says "Floppy disc failed".
Jeff
Site Admin
Posts: 8093 Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:
Post
by Jeff » Mon Dec 13, 2010 12:26 am
mau_rizio wrote: Connected to the last connector, the one after the twist.
The red wire is on the right near the id jumpers.
If i set ID2, the bios says "Floppy disc failed".
ok.
under msdos you can read the floppy disk ?
Or can boot an msdos floppy image?
Jeff
Site Admin
Posts: 8093 Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:
Post
by Jeff » Mon Dec 13, 2010 12:37 am
Jeff wrote: mau_rizio wrote: Connected to the last connector, the one after the twist.
The red wire is on the right near the id jumpers.
If i set ID2, the bios says "Floppy disc failed".
ok.
under msdos you can read the floppy disk ?
Or can boot an msdos floppy image?
Another point :the HFE file interface setting is set to "IBM PC 1.44MB" or "IBM PC 720KB" ?
mau_rizio
Posts: 69 Joined: Tue May 05, 2009 5:08 pm
Post
by mau_rizio » Mon Dec 13, 2010 1:20 am
Jeff wrote: mau_rizio wrote: Connected to the last connector, the one after the twist.
The red wire is on the right near the id jumpers.
If i set ID2, the bios says "Floppy disc failed".
ok.
under msdos you can read the floppy disk ?
Or can boot an msdos floppy image?
I got no boot disk images, i got only real dos floppy.
Do you know where i can find a boot image?
Another point :the HFE file interface setting is set to "IBM PC 1.44MB" or "IBM PC 720KB" ?
Don't know because i selected Create FS Floppy, 720Kb msdos, injected the directory, export.
Jeff
Site Admin
Posts: 8093 Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:
Post
by Jeff » Mon Dec 13, 2010 8:17 am
mau_rizio wrote: Jeff wrote: mau_rizio wrote: Connected to the last connector, the one after the twist.
The red wire is on the right near the id jumpers.
If i set ID2, the bios says "Floppy disc failed".
ok.
under msdos you can read the floppy disk ?
Or can boot an msdos floppy image?
I got no boot disk images, i got only real dos floppy.
Do you know where i can find a boot image?
http://www.allbootdisks.com/download/dos.html
mau_rizio wrote:
Another point :the HFE file interface setting is set to "IBM PC 1.44MB" or "IBM PC 720KB" ?
Don't know because i selected Create FS Floppy, 720Kb msdos, injected the directory, export.
->Menu Settings
->"SDCard HxC Floppy Emulator Settings"
-> Select AUTO
->After Load your hfe file on the main window
->The interface mode of the file is indicated in the "SDCard HxC Floppy Emulator Settings" window.
mau_rizio
Posts: 69 Joined: Tue May 05, 2009 5:08 pm
Post
by mau_rizio » Mon Dec 13, 2010 11:36 am
Don't work, the pc does a little access to the hxc then windows load (but it works with another sd).
Jeff
Site Admin
Posts: 8093 Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:
Post
by Jeff » Mon Dec 13, 2010 11:56 am
mau_rizio wrote: Don't work, the pc does a little access to the hxc then windows load (but it works with another sd).
Which firmware version can you read on the hxc floppy emulator display ?
Again : Can you measure the 5V PC power supply ?
And give me the exact SDCard brand/model number.
mau_rizio
Posts: 69 Joined: Tue May 05, 2009 5:08 pm
Post
by mau_rizio » Mon Dec 13, 2010 1:14 pm
Jeff wrote: mau_rizio wrote: Don't work, the pc does a little access to the hxc then windows load (but it works with another sd).
Which firmware version can you read on the hxc floppy emulator display ?
1.3.1.0b
Again : Can you measure the 5V PC power supply ?
Yes, tell me where to test
And give me the exact SDCard brand/model number.
SanDisk sdhc 4GB c4 - BH1020916046G
Jeff
Site Admin
Posts: 8093 Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:
Post
by Jeff » Mon Dec 13, 2010 1:31 pm
mau_rizio wrote:
Again : Can you measure the 5V PC power supply ?
Yes, tell me where to test
Red and black wire of the PSU floppy connector.
mau_rizio
Posts: 69 Joined: Tue May 05, 2009 5:08 pm
Post
by mau_rizio » Tue Dec 14, 2010 12:39 am
4,97
But the hxc has power even if it's connected with just the floppy cable?
Jeff
Site Admin
Posts: 8093 Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:
Post
by Jeff » Tue Dec 14, 2010 1:14 am
mau_rizio wrote: 4,97
But the hxc has power even if it's connected with just the floppy cable?
You need the power supply cable to powered the hxc floppy emulator.
the emulator may be powered by the floppy cable, but this is only a side effect.
mau_rizio
Posts: 69 Joined: Tue May 05, 2009 5:08 pm
Post
by mau_rizio » Tue Dec 14, 2010 3:29 pm
I can send you the card, if you think this can help you to investigate the problem.
I have an identical card with the same problems so i can help you with tests.
Jeff
Site Admin
Posts: 8093 Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:
Post
by Jeff » Tue Dec 14, 2010 9:01 pm
mau_rizio wrote: I can send you the card, if you think this can help you to investigate the problem.
I have an identical card with the same problems so i can help you with tests.
Ok thanks for this.
I will recontact you once i get the sdcard and the solution.