Can I configure SD HxC rev.F for 2.88MB?

HxC Floppy Emulator on IBM PC and compatible support
Post Reply
Ancient
Posts: 2
Joined: Wed Sep 18, 2019 9:59 am

Can I configure SD HxC rev.F for 2.88MB?

Post by Ancient » Wed Sep 18, 2019 10:18 am

I have 2.88MB 2ED floppy drive and It works well on my PC (ASUS P/I-XP55T2P4 Rev 3.0 Intel 430HX chipset).
I've replaced this FDD and 5.25in 1.2MB FDD.
The emulator works well for 2HD, 2HC, 2DD.
But, It cannot work for 2ED.

How can I configure it? or It cannot work?

Ancient
Posts: 2
Joined: Wed Sep 18, 2019 9:59 am

Re: Can I configure SD HxC rev.F for 2.88MB?

Post by Ancient » Wed Sep 18, 2019 3:41 pm

I did other format test.

2HD 2DD 2HC 2D(8 sectors) 1D(8 sectors) PASSED!
2ED Do not work!
2D(8 sectors) 1D(8 sectors) Can read , Cannot format

Jeff
Site Admin
Posts: 6799
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: Can I configure SD HxC rev.F for 2.88MB?

Post by Jeff » Thu Sep 19, 2019 8:06 am

Ancient wrote:
Wed Sep 18, 2019 3:41 pm
2ED Do not work!
Yes sure : The emulator is not compatible with these disks, at least not at 1Mb/s. You can try to change the the bitrate to 500Kb/s.

Post Reply