Gotek LCD Schematic
Gotek LCD Schematic
Hi all.
I just ordered an LCD and the other parts to add to one of my Goteks.
There are some good references out there on how to connect it up. But not a good diagram.
I mocked up one and am looking for confirmation it is right. If it is I will take good pictures of the project and post here.
I am figuring the Enter switch need to be grounded?
Thanks,
Ron
I just ordered an LCD and the other parts to add to one of my Goteks.
There are some good references out there on how to connect it up. But not a good diagram.
I mocked up one and am looking for confirmation it is right. If it is I will take good pictures of the project and post here.
I am figuring the Enter switch need to be grounded?
Thanks,
Ron
Re: Gotek LCD Schematic
The ground is at the jumper place..rfancella wrote:Hi all.
I just ordered an LCD and the other parts to add to one of my Goteks.
There are some good references out there on how to connect it up. But not a good diagram.
I mocked up one and am looking for confirmation it is right. If it is I will take good pictures of the project and post here.
I am figuring the Enter switch need to be grounded?
Thanks,
Ron
Re: Gotek LCD Schematic
Got it. Thank you!
I got all the parts in yesterday and wired it all up. Works perfect first time!
The modified diagram is below: Now, where and how to mount it.
Here is a picture of the display:
The wiring of the display:
Now, I wonder if the larger 20x4 display could/would be supported?
Thanks,
Ron
I got all the parts in yesterday and wired it all up. Works perfect first time!
The modified diagram is below: Now, where and how to mount it.
Here is a picture of the display:
The wiring of the display:
Now, I wonder if the larger 20x4 display could/would be supported?
Thanks,
Ron
Re: Gotek LCD Schematic
Thank you very much for the diagram!
Re: Gotek LCD Schematic
Has someone the diagram for the sound mod?
Re: Gotek LCD Schematic
Soooo cool rfancella! Just what I was looking for!
Decided to help where I can in this forum, so for now it must be redrawing schematic.
Decided to help where I can in this forum, so for now it must be redrawing schematic.
- Attachments
-
- Redraw of rfancellas schematic image
- Gotek-LCD-mod-Diagram.jpg (241.51 KiB) Viewed 20320 times
============================================
Amiga & Amstrad - what else...
Amiga & Amstrad - what else...
Re: Gotek LCD Schematic
Wow, very nice! Thank you!
Thanks,
Ron
Thanks,
Ron
AmiAms wrote:Soooo cool rfancella! Just what I was looking for!
Decided to help where I can in this forum, so for now it must be redrawing schematic.
Re: Gotek LCD Schematic
Thanks, kudos from here!
Re: Gotek LCD Schematic
Just what I was looking for.
I have a Gotek/USB unit with Cotex Image.
Do I just purchase a license copy of HxC image and install on USB stick.
HOLD both buttons and image gets installed.
Which image should I use?
Then this wiring to my 2 Line IC2 module will work.
Correct?
I have a Gotek/USB unit with Cotex Image.
Do I just purchase a license copy of HxC image and install on USB stick.
HOLD both buttons and image gets installed.
Which image should I use?
Then this wiring to my 2 Line IC2 module will work.
Correct?
Re: Gotek LCD Schematic
Sorry for dumb question, I'm just discovering things.
What is the button for. A reset?
What is the button for. A reset?
Re: Gotek LCD Schematic
Select button.wallyB wrote:Sorry for dumb question, I'm just discovering things.
What is the button for. A reset?