HxC2001 in SF354 enclosure on 520ST - won't read the device

HxC Floppy Emulator on Atari ST support
Jeff
Site Admin
Posts: 5719
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: HxC2001 in SF354 enclosure on 520ST - won't read the dev

Post by Jeff » Wed Sep 17, 2014 10:01 pm

blakespot wrote:Have we heard of other folks with this issue?

Jeff, it it possible that the device can't be used in this fashion? I have a Rev. F with latest firmware, again.


bp
Of course it can be used to emulate 2 drives...
The problem is related to the SF354. The DS1 signal is not connected to the HE10 34 connector on the SF354. DS1 signal go to the daisy chain output connector.

Image

Your SF354 is the "Station A". You need to connect the drive "Drive Select B" wire to the wire n°12 of the floppy ribbon and set the ID0-A and ID1-B switch/jumper.

blakespot
Posts: 35
Joined: Sun Dec 30, 2012 10:32 pm

Re: HxC2001 in SF354 enclosure on 520ST - won't read the dev

Post by blakespot » Thu Sep 18, 2014 4:01 pm

Thank you.

Of course, it worked.



bp

blakespot
Posts: 35
Joined: Sun Dec 30, 2012 10:32 pm

Re: HxC2001 in SF354 enclosure on 520ST - won't read the dev

Post by blakespot » Mon Sep 22, 2014 3:35 pm

I will do a proper blog post with video on it shortly, but in a nutshell:

https://vine.co/v/O7bzDwBrTOt



bp

Post Reply