"!!<<bad file>>!!" means that you are trying to load a file that isn't a HFE file.telengard wrote:Just to be sure, I switched the HxC over to the external power supply and I'm still seeing the !!<<bad file>>!!. Might not be related, but I'd be curious to know what causes that.
Other possiblities :
-> You have removed the HFE file from the SD without removing it from the slot.
-> You have corrupted the CFG file or the HFE file. This may happen if the ST is going to be completly nuts and write bad data to the SD with the AUTOBOOT software. Try to use the emulator without the AUTOBOOT software (use a normal cfg file).
A last possibility : overvoltage on the hxc ( > 5.6V ), which produce communication error with the SD Card. Again : Check your PSU voltage, and/or try another SD brand & model...