Hello !
At first sorry my english !!!
I have buyed a SD Emulator from lotharek , it work very good !
But i have these problem :
When i launch my Workbench1.3.hfe file the Workbench will boot and the Workbench screen come !
When I eject using the middle button and insert another one ( for example : the Workbench Extras.hfe ) the disk doesn't appear on my workbench screen!
I don't know how i can load my WBExtras !
I have the Firmware 1.3.0.4 !
cu
Agass
small problem ?
Re: small problem ?
It's probably a jumper setting/ floppy cable problem.Agass wrote:Hello !
At first sorry my english !!!
I have buyed a SD Emulator from lotharek , it work very good !
But i have these problem :
When i launch my Workbench1.3.hfe file the Workbench will boot and the Workbench screen come !
When I eject using the middle button and insert another one ( for example : the Workbench Extras.hfe ) the disk doesn't appear on my workbench screen!
I don't know how i can load my WBExtras !
I have the Firmware 1.3.0.4 !
cu
Agass
Have a look to this:
https://hxc2001.com/floppy_drive_emulat ... Manual.pdf
at the page 7.
Re: small problem ?
Hello !
I was searching a floppy cabel that i can connect my CPC6128 to the SD HxC Floppy Drive Emulator ( as external drive )
Who know where i can get this floppy cable ?
cu
Agass
I was searching a floppy cabel that i can connect my CPC6128 to the SD HxC Floppy Drive Emulator ( as external drive )
Who know where i can get this floppy cable ?
cu
Agass