LBA change error

[repairlab]

Hi guys,

I finally managed to flash my gotek (had to set my dongle serial port from 12 to 2 to detect the STM32) and after updating it using the file in the "On_Screen_Display_Firmware" folder to make the small OLED screen work and copying the Amiga files it boots with error:

"LBA Change Test Failed, Write Issue?"

Please advise.

br,
george

https://www.icloud.com/photos/#07er3ZWh ... m7As51m1pw

[repairlab]

apparently the retroninja external floppy adapter seems to cause some conflict.. if I place the gotek internally it works..

other issue it that the USB stick is not detected when powering on - I have to re-insert it.

[Jeff]

Hello,

Which usb stick are you using ?

[repairlab]

using a pretty old 256mb one ...could this be the problem?

[Jeff]

using a pretty old 256mb one ...could this be the problem?

I think i have fixed the issue. Since the issue was in the bootloader, flash it again (using the email or the serial method).

[repairlab]

hi Jeff,

so you mean you fixed some bug?

I did flash it again today using serialbridge and then updated it blindly to get OLED output but the USB is still not detected on power on.

see video here:
https://www.icloud.com/photos/#086o8Ke0 ... sgipzQMAkw

any ideas?

apologies for the crap video.

[Jeff]

hi Jeff,

so you mean you fixed some bug?

I did flash it again today using serialbridge and then updated it blindly to get OLED output but the USB is still not detected on power on.

see video here:
https://www.icloud.com/photos/#086o8Ke0 ... sgipzQMAkw

any ideas?

apologies for the crap video.

Can you please try the latest firmware version ? : HxCFEUSB_V4_2_8_4a.UPD

[repairlab]

where can I get that file? mind you I need the version that supports the small OLED screen.

EDIT: I found it in the WIP folder!

same results:
https://www.icloud.com/photos/#0a9yTud7 ... BGy3X76DgQ

[Jeff]

where can I get that file? mind you I need the version that supports the small OLED screen.

EDIT: I found it in the WIP folder!

same results:
https://www.icloud.com/photos/#0a9yTud7 ... BGy3X76DgQ

This may be an power supply issue, but please wait 10 seconds before removing the stick, the emulator try to reset the usb stick every 4 or 5 seconds with this version.

[repairlab]

perfect thanks I will try all options!