FIXED: Hxc Slim not detects DF1 after reboots

HxC Floppy Emulator on Amiga support
Post Reply
oscarbraindead
Posts: 5
Joined: Sat May 25, 2013 5:04 pm

FIXED: Hxc Slim not detects DF1 after reboots

Post by oscarbraindead »

Hi all,
I'm having troubles with a hxc slim disk emulator in an Amiga 500, in order to get working df0 and df1 simultaneously.
The switchs 1 and 6 are ON and DF1 option is ON.
I start the disk manager, select two files in for the slot 1 (for A and B drives) and press F10. The system reboot and doesn't recognize the df1: drive. If I turn off the computer from the PSU and turn on it again, then df1 works flawlessly... once recognized, if I reboot the computer with the keyboard (Amiga keys + Ctrl) then the DF1: is lost again.

I'm using:

-amiga 500
-hxc slim emulator
-firmware v2.0.2.2
-disk manager version 1.14a

Is it a bug or the expected behavior?

Thanks in advance.

Edit: I've tried with a more recent manager version (v1.65a) with same results only detetcs the DF1: when turn off/on from PSU

EDIT2: updating the hxc firmware to 2.1.4.0 fixed the problem

Jeff
Site Admin
Posts: 8092
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: FIXED: Hxc Slim not detects DF1 after reboots

Post by Jeff »

Fine ! :D

Post Reply