ERROR: Can't open HXCSDFE.cfg (DF1/A1200)

HxC Floppy Emulator on Amiga support
Post Reply
Xnyle
Posts: 2
Joined: Wed May 17, 2017 8:00 pm

ERROR: Can't open HXCSDFE.cfg (DF1/A1200)

Post by Xnyle »

Hi,

I just flashed a Gotek, downloaded everything from the bottom of https://hxc2001.com/download/floppy_driv ... /#stm32hxc

and tried to boot from DF1 via early boot menu.

So far so good, autoboot.hfs boots up but displays the error in the subject.

I tried several USB sticks, 4/8/16GB, old new, all the same.

Sticks are always formatted as FAT32 and first file copied on them is HXCSDFE.CFG followed by AUTOBOOT.HFE, nothing else yet.

Any suggestions?

Xnyle
Posts: 2
Joined: Wed May 17, 2017 8:00 pm

Re: ERROR: Can't open HXCSDFE.cfg (DF1/A1200)

Post by Xnyle »

Next Problem in Indexed Mode:

All disks (copied AUTOBOOT.HFE as DSKA0000.HFE, DSKA0001.HFE) are write protected?

DSKA0002.ADF isn't detected at all, even if I delete all HFE files and rename it to DSKA0000.ADF?

Jeff
Site Admin
Posts: 8092
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: ERROR: Can't open HXCSDFE.cfg (DF1/A1200)

Post by Jeff »

Xnyle wrote:Hi,

I just flashed a Gotek, downloaded everything from the bottom of https://hxc2001.com/download/floppy_driv ... /#stm32hxc

and tried to boot from DF1 via early boot menu.

So far so good, autoboot.hfs boots up but displays the error in the subject.

I tried several USB sticks, 4/8/16GB, old new, all the same.

Sticks are always formatted as FAT32 and first file copied on them is HXCSDFE.CFG followed by AUTOBOOT.HFE, nothing else yet.

Any suggestions?
If you can make a low level image of your usb stick, this may help me to understand the issue.

Post Reply