Hxcmount for amiga

HxC Floppy Emulator on Amiga support
enemy
Posts: 14
Joined: Thu Dec 24, 2015 2:09 am

Re: Hxcmount for amiga

Post by enemy »

Works and transfers the file great. .. needs the to be able to copy all of all directories within the folder though as is a pain to transfer a lot of folders within folders but great work

enemy
Posts: 14
Joined: Thu Dec 24, 2015 2:09 am

Re: Hxcmount for amiga

Post by enemy »

Seems to have problems with directories which are more than 2 in depth ... Anyone else had this problem

gonk23
Posts: 38
Joined: Sat Jun 15, 2013 4:21 pm
Location: Melbourne, Australia

Re: Hxcmount for amiga

Post by gonk23 »

enemy wrote:Works and transfers the file great. .. needs the to be able to copy all of all directories within the folder though as is a pain to transfer a lot of folders within folders but great work
I haven't had the need to do this. I normally put a bunch of compressed .lha files into a "tocopy" folder on the SD card, and then copy those. All of my WHDLoad files are like this. When I extract the .lha files on the Amiga, they create all the subfolders.
enemy wrote:Seems to have problems with directories which are more than 2 in depth ... Anyone else had this problem
Hmmm, yes I just tried a copy 5 levels deep and it gave me a Software Failure, program failed error #80000003. Is this the same problem you had? I probably won't be able to debug this for a while (busy with other stuff) so I recommend you use the approach I mentioned above. I've added it to the "issues" list.

cedric731
Posts: 14
Joined: Sat Jan 30, 2016 11:23 am
Location: France

Re: Hxcmount for amiga

Post by cedric731 »

Hi gonk23, thanks for your work on this hxcmount.

I've tested it on a A500 1mb chip/8mb fast with a CF as HDD, my floppy drive is a gotek with last hxc fw.
I succed to list the usb stick with hxcfe dir command but for the copy it fails my system is frozen some seconds after entering the command. Tested with a tiny and a 1mb lha file, both failed with same behavior.

@norb: what kind of file have you successfully copied with your gotek?
Image

norb
Posts: 32
Joined: Tue Oct 13, 2015 3:13 pm

Re: Hxcmount for amiga

Post by norb »

Simple Gui for hxcmount
This is script for GUI4Cli
Attachments
hxcgui.eng.jpg
hxcgui.eng.jpg (82.72 KiB) Viewed 10027 times

cedric731
Posts: 14
Joined: Sat Jan 30, 2016 11:23 am
Location: France

Re: Hxcmount for amiga

Post by cedric731 »

norb wrote:Simple Gui for hxcmount
This is script for GUI4Cli
Thanks norb, can you post your script for GUI4Cli?

I will try it but i don't think i will change anything for me. What kind of hdd do you have in your 1200? do you have the Hxc FW (i see the cortex one on your usb stick)?
Image

norb
Posts: 32
Joined: Tue Oct 13, 2015 3:13 pm

Re: Hxcmount for amiga

Post by norb »

Yes, I can. I will send today. I add more features.

I tested gotek hxc on a1200.
I saved file to ram:
Files was small and max 1.4MB.
All was fine.

Selectora.ADF only exists on pendrive. This is my test USB stick

norb
Posts: 32
Joined: Tue Oct 13, 2015 3:13 pm

Re: Hxcmount for amiga

Post by norb »

gonk23 wrote:I've updated the version to 0.2. This fixes the memory leak problem for most normal cases except when there are sector read/write errors (which are uncommon).

Please use the latest version from: https://github.com/gonk23/HXCFE_Amiga_copy_utility
I tried to read a normal stick (no files hxc).
Hxcfe read only directory. File could not be copied to HDD.

The stick must have autoboot.hfe?

norb
Posts: 32
Joined: Tue Oct 13, 2015 3:13 pm

Re: Hxcmount for amiga

Post by norb »

GuiFE v0.4 (script Gui4CLI) for HxcFE

Requires: OS 3.0+ (Gui4CLI)


speed hxcfe. (standard a1200)
880kb to RAM: - 154sek.
880kb to HDD - 163sek.
Attachments
gui0.4.zip
(1.33 KiB) Downloaded 616 times

cedric731
Posts: 14
Joined: Sat Jan 30, 2016 11:23 am
Location: France

Re: Hxcmount for amiga

Post by cedric731 »

norb wrote: I tried to read a normal stick (no files hxc).
Hxcfe read only directory. File could not be copied to HDD.

The stick must have autoboot.hfe?
Same issue for me, i am in normal mode so i don't have autoboot.hfe
norb wrote:GuiFE v0.4 (script Gui4CLI) for HxcFE

Requires: OS 3.0+ (Gui4CLI)


speed hxcfe. (standard a1200)
880kb to RAM: - 154sek.
880kb to HDD - 163sek.
Thanks! i will give a try soon and this time i will copy the files to ram, l will report the result.
Image

cedric731
Posts: 14
Joined: Sat Jan 30, 2016 11:23 am
Location: France

Re: Hxcmount for amiga

Post by cedric731 »

cedric731 wrote:
Thanks! i will give a try soon and this time i will copy the files to ram, l will report the result.
Hi,

I've made some tests and it works on gotek if i copy the file to ram without the gui. Thanks norb for the tips.
For a 1Mb file it takes about 6 minutes.
FYI here is a screenshot of the display during the copy.
Thanks again to gonk23, it's a useful tool.
Attachments
IMG_20160313_152433~2.jpg
IMG_20160313_152433~2.jpg (14.53 KiB) Viewed 9985 times
Image

elpiloto
Posts: 30
Joined: Sat Feb 02, 2013 6:48 am
Location: Buenos Aires, Argentina
Contact:

Re: Hxcmount for amiga

Post by elpiloto »

im tring to use the gui on an a500 but it faild to load with an software failure, anyone tryed it on a 500?

norb
Posts: 32
Joined: Tue Oct 13, 2015 3:13 pm

Re: Hxcmount for amiga

Post by norb »

GuiFE v0.4 (script Gui4CLI) for HxcFE

Requires: OS 3.0+ (Gui4CLI)

elpiloto
Posts: 30
Joined: Sat Feb 02, 2013 6:48 am
Location: Buenos Aires, Argentina
Contact:

Re: Hxcmount for amiga

Post by elpiloto »

norb wrote:GuiFE v0.4 (script Gui4CLI) for HxcFE

Requires: OS 3.0+ (Gui4CLI)
well yes, my a500 have kickstart 3.1, classic workbench 3.1 and gui4cli 3.8 was installed, downloaded from http://gui4cli.com/ami/gcmain.htm
Attachments
DSC_1360.JPG
DSC_1360.JPG (215.72 KiB) Viewed 9661 times

norb
Posts: 32
Joined: Tue Oct 13, 2015 3:13 pm

Re: Hxcmount for amiga

Post by norb »

Delete all lines with word "attr" or wait for fix version

Gui4CLI dont like "attr" and mc68000

Post Reply