Cannot select DMS image on OLED?

HxC Floppy Emulator on Amiga support
Post Reply
n9yty
Posts: 7
Joined: Thu Jun 04, 2015 10:42 pm

Cannot select DMS image on OLED?

Post by n9yty » Sat Jan 12, 2019 12:59 am

I upgraded the Gotek running HxC firmware to include an OLED board. Now, it seems to ignore slots and just browses the files stored on the drive. That shouldn't be a problem, except it is not showing the DMS images I put on there, it only shows the ADF images. I tried to boot to the selector, and cleared all the slots and only put the two DMS images in, but when I reboot (or even power off) the selection still scrolls through only the ADF images on the flash drive.

What am I doing wrong?

n9yty
Posts: 7
Joined: Thu Jun 04, 2015 10:42 pm

Re: Cannot select DMS image on OLED?

Post by n9yty » Sat Jan 12, 2019 8:15 am

It seems GOTEK only supports ADF format on Amiga. Sorry, I have a hard time separating all the information out there from the regular HxC capabilities and the Gotek, but now I know. :)

Jeff
Site Admin
Posts: 6058
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: Cannot select DMS image on OLED?

Post by Jeff » Sun Jan 13, 2019 1:48 am

n9yty wrote:
Sat Jan 12, 2019 8:15 am
It seems GOTEK only supports ADF format on Amiga. Sorry, I have a hard time separating all the information out there from the regular HxC capabilities and the Gotek, but now I know. :)
In this case use the Windows/Mac HxC Software to convert the images to HFE.

norb
Posts: 26
Joined: Tue Oct 13, 2015 3:13 pm

Re: Cannot select DMS image on OLED?

Post by norb » Sun Jan 13, 2019 12:30 pm

Or convert DMS to ADF

Jeff
Site Admin
Posts: 6058
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: Cannot select DMS image on OLED?

Post by Jeff » Sun Jan 13, 2019 3:26 pm

norb wrote:
Sun Jan 13, 2019 12:30 pm
Or convert DMS to ADF
ADF don't keep some subtleties. :wink:

norb
Posts: 26
Joined: Tue Oct 13, 2015 3:13 pm

Re: Cannot select DMS image on OLED?

Post by norb » Mon Jan 14, 2019 8:06 pm

DMS too :wink:

Post Reply