Firmware update procedure

HxC Floppy Emulator on Amiga support
Post Reply
MatthewNS
Posts: 5
Joined: Sat Sep 30, 2017 6:45 pm

Firmware update procedure

Post by MatthewNS » Wed Nov 01, 2017 10:10 am

Hi,

I have the v3.0.8.2a in my USB Gotek. I would like to update to v3.0.19.2a to get finally sound emulation.

..firmware procedure describes one step:

"Power up the device and keep the button pressed during at least 2 seconds"

Which button? My Gotek is equipped by two buttons. No matter which one?

Matt

Jeff
Site Admin
Posts: 4914
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: Firmware update procedure

Post by Jeff » Thu Nov 02, 2017 9:01 am

MatthewNS wrote:
Wed Nov 01, 2017 10:10 am
Hi,

I have the v3.0.8.2a in my USB Gotek. I would like to update to v3.0.19.2a to get finally sound emulation.

..firmware procedure describes one step:

"Power up the device and keep the button pressed during at least 2 seconds"

Which button? My Gotek is equipped by two buttons. No matter which one?

Matt
Both buttons in the same time.
btw take the last firmware version, not the 19.2.

Post Reply