Casio FZ 10m problems with Gotek

[ghostinthemachine]

Hi,

i have installed an Gotek Emulator with the HXC Firmware and Oled Screen. After installing the Gotek in the Casio FZ10m. It only starts when a USB Stick with and HFE File is inserted, if i take out the Stick it hangs and does not boot at all. Any Ideas why this is happening? Anyone who got this working on an FZ10m?

[Jeff_HxC2001]

Hi,

i have installed an Gotek Emulator with the HXC Firmware and Oled Screen. After installing the Gotek in the Casio FZ10m. It only starts when a USB Stick with and HFE File is inserted, if i take out the Stick it hangs and does not boot at all. Any Ideas why this is happening? Anyone who got this working on an FZ10m?

Which firmare version have you ?
What is displayed on the gotek screen without stick inserted ?

[ghostinthemachine]

No USB Stick found
push up down for menu


when i enter the menu and check for the software version: 3.1.23.1aL

[Jeff]

No USB Stick found
push up down for menu


when i enter the menu and check for the software version: 3.1.23.1aL

Try to update to the latest firmware :
https://hxc2001.com/download/floppy_dri ... rmware.zip

https://hxc2001.com/docs/gotek-floppy-e ... pdate.html

[ghostinthemachine]

Jeff i updated to the latest Firmware but still the same. With USB Stick and HFE File it boots without it hangs on the FZ-10m Boot Screen.

[Jeff]

Jeff i updated to the latest Firmware but still the same. With USB Stick and HFE File it boots without it hangs on the FZ-10m Boot Screen.

Try to force the interface mode : Press both buttons to enter the menu, choose "Interface cfg" then "shugart" and "exit".

[ghostinthemachine]

I tried that with the shugart mode. but still the same problem.

is there an image out there with the optional software for ram testing the FZ Sampler?

[ghostinthemachine]

what is the jumper setting for the Casio FZ?

[Jeff]

what is the jumper setting for the Casio FZ?

S0 i suppose, but let's check the setting : What was the old drive brand and model and what is its jumper setting ?

[ghostinthemachine]

I tried S0, Mo, S0+Mo no luck.

It hangs till i put a usb into the emulator.

[Jeff]

I tried S0, Mo, S0+Mo no luck.

It hangs till i put a usb into the emulator.

No idea about the floppy disk drive brand & model ?

[ghostinthemachine]

Matsushita FMD02290B4

[Jeff]

Matsushita FMD02290B4

FMD02290B4 is not the product model.

[ghostinthemachine]

It is JU-255

[Jeff]

Can you share the images you are using ?