Hi Jeff,
Considering the models of Akai S series Samplers can read floppy disks from other models without issue. Am I correct to assume this is not possible with HFE files. The reason I ask is because I'm having no luck with an S3000XL reading HFE files created on an S1000. It just says "no disk"
Thanks
J
Akai S Series cross compatibility
Re: Akai S Series cross compatibility
Sure it is possible. You must set/force the floppy interface mode matching with the S3000XL into the embedded menu or in the config file.j1mpst3r wrote: ↑Fri May 24, 2019 4:41 pmHi Jeff,
Considering the models of Akai S series Samplers can read floppy disks from other models without issue. Am I correct to assume this is not possible with HFE files. The reason I ask is because I'm having no luck with an S3000XL reading HFE files created on an S1000. It just says "no disk"
Thanks
J
Re: Akai S Series cross compatibility
Thanks for the prompt reply as always Jeff.
I would be grateful if you could explain how I would do that.
Thanks
J
I would be grateful if you could explain how I would do that.
Thanks
J
Re: Akai S Series cross compatibility
With oled/lcd screens : Remove the stick, press both buttons, select interface cfg , ibm pc hd, exit.
With digits screen : Remove the stick, press both buttons, select '1', then '02'.
menu meaning there :
https://hxc2001.com/docs/gotek-floppy-e ... gotek_menu
Re: Akai S Series cross compatibility
Thanks Jeff, I got lost and ended up on the custom firmware editor I'll do what you said and check the link.