I got this E-Mu ESI-4000, which has a Gotek HxC Floppy running firmware version 3.1.46.1A
Converting normally .img to .HFE and loading workes fine. I also here have an issue with formatting the .HFE disks, but it could be the issue you mentioned earlier with a too slow USB stick.
Do you have a blank image for Emu ESI?
Note:
I already tested “1.44MB DOS IMG file” and it does not work.
Emu ESI series blank disks?
Re: Emu ESI series blank disks?
Hi Jean,
I just uploaded an example: [which i´m able to load on my Emu ESI-4000] and attached screenshot from the ESI-32 manual.
https://www.dropbox.com/s/59y8oemoq35xh ... i.zip?dl=0
- Attachments
-
- screenshot.JPG (38.76 KiB) Viewed 2654 times
Re: Emu ESI series blank disks?
ok so the answer is "no".teevee wrote: ↑Fri Apr 26, 2019 12:24 pmHi Jean,
I just uploaded an example: [which i´m able to load on my Emu ESI-4000] and attached screenshot from the ESI-32 manual.
https://www.dropbox.com/s/59y8oemoq35xh ... i.zip?dl=0
Please use another usb stick to format the hfe or try to format the img file.