Emu ESI series blank disks?

Post Reply
teevee
Posts: 123
Joined: Sun Nov 03, 2013 7:21 pm

Emu ESI series blank disks?

Post by teevee » Fri Apr 26, 2019 11:46 am

I got this E-Mu ESI-4000, which has a Gotek HxC Floppy running firmware version 3.1.46.1A

Converting normally .img to .HFE and loading workes fine. I also here have an issue with formatting the .HFE disks, but it could be the issue you mentioned earlier with a too slow USB stick.

Do you have a blank image for Emu ESI?

Note:
I already tested “1.44MB DOS IMG file” and it does not work.

Jeff
Site Admin
Posts: 6303
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: Emu ESI series blank disks?

Post by Jeff » Fri Apr 26, 2019 12:15 pm

Is this using a normal dos format ?

teevee
Posts: 123
Joined: Sun Nov 03, 2013 7:21 pm

Re: Emu ESI series blank disks?

Post by teevee » Fri Apr 26, 2019 12:24 pm

Jeff wrote:
Fri Apr 26, 2019 12:15 pm
Is this using a normal dos format ?
Hi Jean,
I just uploaded an example: [which i´m able to load on my Emu ESI-4000] and attached screenshot from the ESI-32 manual.
https://www.dropbox.com/s/59y8oemoq35xh ... i.zip?dl=0
Attachments
screenshot.JPG
screenshot.JPG (38.76 KiB) Viewed 212 times

Jeff
Site Admin
Posts: 6303
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: Emu ESI series blank disks?

Post by Jeff » Fri Apr 26, 2019 12:30 pm

teevee wrote:
Fri Apr 26, 2019 12:24 pm
Jeff wrote:
Fri Apr 26, 2019 12:15 pm
Is this using a normal dos format ?
Hi Jean,
I just uploaded an example: [which i´m able to load on my Emu ESI-4000] and attached screenshot from the ESI-32 manual.
https://www.dropbox.com/s/59y8oemoq35xh ... i.zip?dl=0
ok so the answer is "no".

Please use another usb stick to format the hfe or try to format the img file.

Post Reply