flashing issue

Post Reply
s219800
Posts: 4
Joined: Mon Feb 18, 2019 1:25 pm

flashing issue

Post by s219800 » Mon Feb 18, 2019 1:46 pm

Hello, I have tried flashing a couple gotek with the HxC software and all went fine, but this time when I get to the part where I insert the USB stick for the software when the LDR screen is on, i get a flashing 004 message (flashes 4 times then pauses for 2 seconds).

This gotek is in an akai S950 right now. I have tried using the indexed mode and i get that error, tried the S950 config mode to no avail, I tried flipping the cable, I tried putting a jumper on s0 and tried without jumper.

I am using a FAT32 formatted usb micro stick with only the .CFG file on it


What am I doing wrong?

Jeff
Site Admin
Posts: 6288
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: flashing issue

Post by Jeff » Mon Feb 18, 2019 3:26 pm

Copy the latest upd file to the stick to finish the firmware installation.

s219800
Posts: 4
Joined: Mon Feb 18, 2019 1:25 pm

Re: flashing issue

Post by s219800 » Mon Feb 25, 2019 12:31 pm

oh yeah! worked as a charm


thanks jeff!

Post Reply