Mr. Jeff,
As title states, I have some hfe images due to the gotek i bought being setup to read hfe. now that I am successfully reading img files direct form omniflop, id like to find a way to convert these hfe images to img. i know you have a batch convert mode on your software, but didnt see if it was possible.
i hope I am not asking you something disrespectful. you have to pardon my ignorance!
if its not possible, no worries. Just wanted to ask.
Mr. Jeff, Can I use your HxC software to convert hfe to img?
-
- Posts: 9
- Joined: Sun Dec 23, 2018 7:21 am
Re: Mr. Jeff, Can I use your HxC software to convert hfe to img?
With the hxc software, open the hfe, export the image to the "IMG file (RAW Sector file format)" file type and change the file extension to "aka".
(the final file size should be 80*2*10*1024=1638400 bytes for S950 images)
(the final file size should be 80*2*10*1024=1638400 bytes for S950 images)
-
- Posts: 9
- Joined: Sun Dec 23, 2018 7:21 am
Re: Mr. Jeff, Can I use your HxC software to convert hfe to img?
since I use img, can I change it to IMG, or MUST I use aka?
thank you!!!
thank you!!!
Re: Mr. Jeff, Can I use your HxC software to convert hfe to img?
you can use "img" if you set the akai mode in the menu.marctronixx wrote: ↑Thu Dec 27, 2018 3:15 amsince I use img, can I change it to IMG, or MUST I use aka?
thank you!!!
-
- Posts: 9
- Joined: Sun Dec 23, 2018 7:21 am
Re: Mr. Jeff, Can I use your HxC software to convert hfe to img?
Thank your for your help sir. Much appreciated. Happy new year.