Hi, there
This is the first time I start to flash the bootloader with your tool. Aftre try here and there, finally I got the "Device detected" message as mentioned in your instruction. But nothing happened when Program button pushed except TX and RX keep increasing(seems endless). And I never saw the progress like ".../100" described by others.
could you please help?
thanks.
Flash Bootloader:Device detected (0 units left)
Re: Flash Bootloader:Device detected (0 units left)
Which account ?tooty wrote: ↑Fri Mar 16, 2018 3:32 pmHi, there
This is the first time I start to flash the bootloader with your tool. Aftre try here and there, finally I got the "Device detected" message as mentioned in your instruction. But nothing happened when Program button pushed except TX and RX keep increasing(seems endless). And I never saw the progress like ".../100" described by others.
could you please help?
thanks.
Re: Flash Bootloader:Device detected (0 units left)
According to the server it seems that you have already flashed one device this morning ?:
Code: Select all
[Fri Mar 16 11:43:23 2018] | --------- Device Signature --------- |
[Fri Mar 16 11:43:23 2018] | Block CRC : 9334
[Fri Mar 16 11:43:23 2018] | IDBlock - STM32 HxCFEBL
[Fri Mar 16 11:43:23 2018] | D:Fri Mar 16 11:42:52 2018
[Fri Mar 16 11:43:23 2018] | U:./ACCOUNT_3439373633353330407
[Fri Mar 16 11:43:23 2018] | S:-XXXXXXXXXXXXXXXXXXXXX
[Fri Mar 16 11:43:23 2018] | A:58.209.XXX.XXX:49375 - - -
[Fri Mar 16 11:43:23 2018] | ------------------------------------ |
Re: Flash Bootloader:Device detected (0 units left)
really? I need to connect the display to confirm whether it's ok or not to flash the firmware tomorrow then let you know. but I'm pretty sure that I did not see the progress%.
thanks for your fast feedback and help anyway.
thanks for your fast feedback and help anyway.
Re: Flash Bootloader:Device detected (0 units left)
yes 100% sure, the drive is flashed.
Re: Flash Bootloader:Device detected (0 units left)
yeees, it's flashed cos I saw Ldr sign after display put back on. now the hxc firmware was also installed. thanks a lot.
next, i'll try to get it into my arburg multronica to work.
next, i'll try to get it into my arburg multronica to work.
Re: Flash Bootloader:Device detected (0 units left)
dear jeff,
following the thread, i put everything in place, and plug it into the arburg multronica. the downloaded discs(multronica ones) were successfully read but i cannot write. could you please advise? thanks
following the thread, i put everything in place, and plug it into the arburg multronica. the downloaded discs(multronica ones) were successfully read but i cannot write. could you please advise? thanks
Re: Flash Bootloader:Device detected (0 units left)
forgot to mention the error msg, "synchrane error"
Re: Flash Bootloader:Device detected (0 units left)
you got an email with something to test.
Let's continue the discussion by email.
Let's continue the discussion by email.