Flash Bootloader:Device detected (0 units left)

Post Reply
tooty
Posts: 6
Joined: Fri Mar 16, 2018 3:18 pm

Flash Bootloader:Device detected (0 units left)

Post by tooty » Fri Mar 16, 2018 3:32 pm

Hi, there

This is the first time I start to flash the bootloader with your tool. Aftre try here and there, finally I got the "Device detected" message as mentioned in your instruction. But nothing happened when Program button pushed except TX and RX keep increasing(seems endless). And I never saw the progress like ".../100" described by others.
could you please help?
thanks.

Jeff
Site Admin
Posts: 5746
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: Flash Bootloader:Device detected (0 units left)

Post by Jeff » Fri Mar 16, 2018 3:41 pm

tooty wrote:
Fri Mar 16, 2018 3:32 pm
Hi, there

This is the first time I start to flash the bootloader with your tool. Aftre try here and there, finally I got the "Device detected" message as mentioned in your instruction. But nothing happened when Program button pushed except TX and RX keep increasing(seems endless). And I never saw the progress like ".../100" described by others.
could you please help?
thanks.
Which account ?

tooty
Posts: 6
Joined: Fri Mar 16, 2018 3:18 pm

Re: Flash Bootloader:Device detected (0 units left)

Post by tooty » Fri Mar 16, 2018 5:55 pm

account info:
ip:
Login: 49763530@qq.com
p/w: *

Jeff
Site Admin
Posts: 5746
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: Flash Bootloader:Device detected (0 units left)

Post by Jeff » Fri Mar 16, 2018 6:28 pm

tooty wrote:
Fri Mar 16, 2018 5:55 pm
account info:
ip:
Login: 49763530@qq.com
p/w: *
According to the server it seems that you have already flashed one device this morning ?:

Code: Select all

[Fri Mar 16 11:43:23 2018] | --------- Device Signature --------- |
[Fri Mar 16 11:43:23 2018] | Block CRC : 9334
[Fri Mar 16 11:43:23 2018] | IDBlock - STM32 HxCFEBL
[Fri Mar 16 11:43:23 2018] | D:Fri Mar 16 11:42:52 2018
[Fri Mar 16 11:43:23 2018] | U:./ACCOUNT_3439373633353330407
[Fri Mar 16 11:43:23 2018] | S:-XXXXXXXXXXXXXXXXXXXXX
[Fri Mar 16 11:43:23 2018] | A:58.209.XXX.XXX:49375 -  -  -
[Fri Mar 16 11:43:23 2018] | ------------------------------------ |

tooty
Posts: 6
Joined: Fri Mar 16, 2018 3:18 pm

Re: Flash Bootloader:Device detected (0 units left)

Post by tooty » Fri Mar 16, 2018 6:40 pm

really? I need to connect the display to confirm whether it's ok or not to flash the firmware tomorrow then let you know. but I'm pretty sure that I did not see the progress%.
thanks for your fast feedback and help anyway.

Jeff
Site Admin
Posts: 5746
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: Flash Bootloader:Device detected (0 units left)

Post by Jeff » Fri Mar 16, 2018 7:25 pm

tooty wrote:
Fri Mar 16, 2018 6:40 pm
really? I need to connect the display to confirm whether it's ok or not to flash the firmware tomorrow then let you know. but I'm pretty sure that I did not see the progress%.
thanks for your fast feedback and help anyway.
yes 100% sure, the drive is flashed.

tooty
Posts: 6
Joined: Fri Mar 16, 2018 3:18 pm

Re: Flash Bootloader:Device detected (0 units left)

Post by tooty » Sun Mar 18, 2018 8:00 am

yeees, it's flashed cos I saw Ldr sign after display put back on. now the hxc firmware was also installed. thanks a lot.

next, i'll try to get it into my arburg multronica to work.

tooty
Posts: 6
Joined: Fri Mar 16, 2018 3:18 pm

Re: Flash Bootloader:Device detected (0 units left)

Post by tooty » Thu Mar 29, 2018 2:03 pm

dear jeff,
following the thread, i put everything in place, and plug it into the arburg multronica. the downloaded discs(multronica ones) were successfully read but i cannot write. could you please advise? thanks

tooty
Posts: 6
Joined: Fri Mar 16, 2018 3:18 pm

Re: Flash Bootloader:Device detected (0 units left)

Post by tooty » Thu Mar 29, 2018 2:04 pm

forgot to mention the error msg, "synchrane error"

Jeff
Site Admin
Posts: 5746
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: Flash Bootloader:Device detected (0 units left)

Post by Jeff » Thu Mar 29, 2018 5:57 pm

you got an email with something to test.
Let's continue the discussion by email.

Post Reply