I2C display not working

Jeff
Site Admin
Posts: 8092
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: I2C display not working

Post by Jeff »

alchemist wrote:
Thu Jan 04, 2018 10:03 pm
Hi,

The display is always blank. I will order the recommended one. Do you want this bad sample for your laboratory, as poisoned gift?
yes please. Send me an email to hxc2001 at hxc2001.com for the details.

EDIT : Are you sure about the SDA/SCL connection on the gotek ?

alchemist
Posts: 31
Joined: Wed Nov 29, 2017 9:48 pm
Location: Belgium

Re: I2C display not working

Post by alchemist »

I swapped the SCL/SDA cables, but the result doesn't change.

I will send you this Ugly Duckling ;)
Kind Regards,
Xavier Miller

Jeff
Site Admin
Posts: 8092
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: I2C display not working

Post by Jeff »

alchemist wrote:
Thu Jan 04, 2018 10:34 pm
I swapped the SCL/SDA cables, but the result doesn't change.

I will send you this Ugly Duckling ;)
with this procedure ? :

Screen connected to the gotek + USB stick with the update -> power up with both buttons pressed -> updating -> end of update/firmware auto start -> the diymore oled screen should turn on.

but it doesn't ?

alchemist
Posts: 31
Joined: Wed Nov 29, 2017 9:48 pm
Location: Belgium

Re: I2C display not working

Post by alchemist »

I followed the procedure (USB + Screen, power on + 2 buttons during 2 seconds, wait, wait, wait....)

Image
Image
Kind Regards,
Xavier Miller

Jeff
Site Admin
Posts: 8092
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: I2C display not working

Post by Jeff »

Here it is the "diymore" oled screen fix to make it reliable :
http://torlus.com/floppy/forum/viewtopi ... 196#p17196

alchemist
Posts: 31
Joined: Wed Nov 29, 2017 9:48 pm
Location: Belgium

Re: I2C display not working

Post by alchemist »

:D
Kind Regards,
Xavier Miller

Post Reply