How i can Writeprotect Image and other problem.

Xiantrius
Posts: 41
Joined: Sun Aug 06, 2017 10:00 am

Re: How i can Writeprotect Image and other problem.

Post by Xiantrius »

hi Jeff,

You had said a few weeks ago you look for because of Garrison 2 Disk 2 in the nexten week.
It's been a long time since, did you forget that?
This would be really nice, if the problem can be fixed, who knows if even more games are concerned with the copy protection work.

Jeff
Site Admin
Posts: 8092
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: How i can Writeprotect Image and other problem.

Post by Jeff »

Xiantrius wrote:
Sun Sep 10, 2017 3:54 pm
hi Jeff,

You had said a few weeks ago you look for because of Garrison 2 Disk 2 in the nexten week.
It's been a long time since, did you forget that?
This would be really nice, if the problem can be fixed, who knows if even more games are concerned with the copy protection work.
I will ! :D

Xiantrius
Posts: 41
Joined: Sun Aug 06, 2017 10:00 am

Re: How i can Writeprotect Image and other problem.

Post by Xiantrius »

Ok :wink:

Xiantrius
Posts: 41
Joined: Sun Aug 06, 2017 10:00 am

Re: How i can Writeprotect Image and other problem.

Post by Xiantrius »

hi Jeff,

#################################

16 September 2017: Firmware STM32 USB HxCFloppyEmulator v3.0.27.1a

- Extra LCD resolutions and sizes options added :

- 2x16 characters (for 2x16 or 2x20 I2C-HD44780 and 128x32 OLED screens)
- 2x18 characters (for 2x20 I2C-HD44780 and 128x32 OLED screens)
- 2x20 characters (for 2x20 I2C-HD44780 and 128x32 OLED screens)
- 2x21 characters (for 128x32 OLED screens only)

To select the desired resolution, enter the internal menu, and choose the "LCD size" sub-menu.

- To enter the internal config menu you can now press both up and down buttons. (without usb stick inserted).

- The internal config menu can now be browsed without the selection button, just wait 4 seconds to select an item.

- SD HxC Floppy Emulator internal EEPROM emulation added : The parameters changed into the internal config menu are
now saved into the Flash memory and restored/used at power up.

- Some more internal optimizations.

#################################

I not understand this.
What buttons do I need to press?
Where do I have to press?
I find for me is somewhat incomprehensible described.
I have already tried mosaics and Up Down buttons. It does not work. Am I doing anything wrong?
Please do not misunderstand, I have the firmware v3.0.27.1a previously installed on my Gotek diskette drive emulator.

maybe...
Is this perhaps for Gotek Floppy Emulators with a display?
If this is so, where can I buy the sound with and with suitable HxC firmware?

Are you so nice and tell me what I have to do?

Jeff
Site Admin
Posts: 8092
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: How i can Writeprotect Image and other problem.

Post by Jeff »

Xiantrius wrote:
Sun Sep 17, 2017 8:40 pm

maybe...
Is this perhaps for Gotek Floppy Emulators with a display?
If this is so, where can I buy the sound with and with suitable HxC firmware?

Are you so nice and tell me what I have to do?
yes this is for gotek with display. you can now connect some nice 128x32 oled screen.

https://hxc2001.com/download/floppy_driv ... SCREEN.jpg

http://www.ebay.com/itm/302110929185 ( IIC Interface ! )

Xiantrius
Posts: 41
Joined: Sun Aug 06, 2017 10:00 am

Re: How i can Writeprotect Image and other problem.

Post by Xiantrius »

Hi Jeff,

This looks like you have to be able to solder there, unfortunately I do not have the knowledge. Is there no ready Gotek drive with charging sound with display?
Could you give me a finished with HxC firmware installed, so I can provide it at any time with new updates?
How do you think 30 € which I would pay you over Paypal?

Jeff
Site Admin
Posts: 8092
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: How i can Writeprotect Image and other problem.

Post by Jeff »

Xiantrius wrote:
Mon Sep 18, 2017 6:22 am
Hi Jeff,

This looks like you have to be able to solder there, unfortunately I do not have the knowledge. Is there no ready Gotek drive with charging sound with display?
Could you give me a finished with HxC firmware installed, so I can provide it at any time with new updates?
How do you think 30 € which I would pay you over Paypal?
there is no solder to do : just plug the oled screen and that's all. same for the buzzer (must be connected to the JB output).

Post Reply