Gotek/Yamaha QX1 Sequencer (Added in Previous message)

Post Reply
rickysco
Posts: 14
Joined: Thu Mar 23, 2017 1:41 am

Gotek/Yamaha QX1 Sequencer (Added in Previous message)

Post by rickysco »

I was looking for a little more help. I have added more to the previous message and was wondering if someone knew the answer. Let me know. Thanks for your time

teevee
Posts: 137
Joined: Sun Nov 03, 2013 7:21 pm

Re: Gotek/Yamaha QX1 Sequencer (Added in Previous message)

Post by teevee »

rickysco wrote:I was looking for a little more help. I have added more to the previous message and was wondering if someone knew the answer. Let me know. Thanks for your time
There is no message above the one you just posted?

mondo1976
Posts: 156
Joined: Mon Dec 28, 2015 3:54 pm

Re: Gotek/Yamaha QX1 Sequencer (Added in Previous message)

Post by mondo1976 »

rickysco wrote:I was looking for a little more help. I have added more to the previous message and was wondering if someone knew the answer. Let me know. Thanks for your time
Why don't you go respond in the original thread? Rephrase your question or elaborate upon what part you don't understand. I explained how to transfer your 5 1/4" disks to an HxC/HFE image using only the stock 5 1/4" drive. If it wasn't clear or there is more you need to know then just respond to my response or teevee's original responses.

No point in opening two threads about the same topic, so let's close (abandon) this one and continue back where we started originally.

Post Reply