Gotek HxC + Akai s-950 - Works!

Post Reply
teevee
Posts: 137
Joined: Sun Nov 03, 2013 7:21 pm

Gotek HxC + Akai s-950 - Works!

Post by teevee »

Yesterday I decided to install a Gotek HxC in my Akai s-950 and it works smooth.

I have set jumper to S0 and floppy cable as picture below: (sorry about the dusty picture)
Image

The only complication was to get the drive out, but I found this video which was helpful in that case:
https://www.youtube.com/watch?v=xaN8gL8EkyA&t

With the Emulator software, you can use the predefined disk layout “Akai s-950” under “Load Raw image”

I also wanted to test it and used the following packages:
http://www.polynominal.com/site/studio/ ... ample.html

mikedean
Posts: 27
Joined: Fri Oct 29, 2010 4:42 am

Re: Gotek HxC + Akai s-950 - Works!

Post by mikedean »

Hi,

Can you post your cfg and hfe files you used to make it work?

Thanks,

Mike

teevee
Posts: 137
Joined: Sun Nov 03, 2013 7:21 pm

Re: Gotek HxC + Akai s-950 - Works!

Post by teevee »

mikedean wrote:Hi,

Can you post your cfg and hfe files you used to make it work?

Thanks,

Mike
There you go -> https://hxc2001.com/download/floppy_driv ... Images.zip :)

mikedean
Posts: 27
Joined: Fri Oct 29, 2010 4:42 am

Re: Gotek HxC + Akai s-950 - Works!

Post by mikedean »

Thanks. Turns out my issue was I used the wrong cfg file.

SynthGeek
Posts: 13
Joined: Mon Aug 28, 2017 10:03 pm

Re: Gotek HxC + Akai s-950 - Works!

Post by SynthGeek »

I am looking at an HxC flashed drive on eBay. Do you recall what firmware version you used? I am looking at a unit flashed with v3.0.8.2a, will this work with an Akai S950? Thanks in advance!

mikedean
Posts: 27
Joined: Fri Oct 29, 2010 4:42 am

Re: Gotek HxC + Akai s-950 - Works!

Post by mikedean »

I used the latest version at the time. Once drive is flashed you can update using USB stick.

teevee
Posts: 137
Joined: Sun Nov 03, 2013 7:21 pm

Re: Gotek HxC + Akai s-950 - Works!

Post by teevee »

SynthGeek wrote:
Mon Aug 28, 2017 11:33 pm
I am looking at an HxC flashed drive on eBay. Do you recall what firmware version you used? I am looking at a unit flashed with v3.0.8.2a, will this work with an Akai S950? Thanks in advance!
I used that version too ;)

lapusiq
Posts: 1
Joined: Fri May 04, 2018 11:29 am

Re: Gotek HxC + Akai s-950 - Works!

Post by lapusiq »

Hello everybody. Sharing how i resolved problem with Akai S950 not recognizing gotek
After I installed flashed HxC Gotek, i couldn't write anything on floppy image, because all images on usb stick were UNF (as Akai S950 says)
same with loading files.
But after I reconnected a floppy cable on my gotek upside down, it became working. Hope that helps :)

Post Reply