GOTEK FLOPPY DRIVE EMULATOR SFR1M44-U100
GOTEK FLOPPY DRIVE EMULATOR SFR1M44-U100
hello, i just received my USB gotek floppy disc emulator model sfr1m44-u100 to exchange it for old model of floppy disc, but I just wondering there are some holes beside jumpers setup, what is it and when should I use it, there are 2 holes in the first line and 5 holes in the second line, I checked on google already but i coudn't find an answer, many of USB floppy emulator has 3 holes in the first line ? is it ok or I made big mistake, Can anyone aswer it as I am fresh on it. see picture attached. Thanks for your help
- Attachments
-
- EN.jpg (177.28 KiB) Viewed 3572 times
Re: GOTEK FLOPPY DRIVE EMULATOR SFR1M44-U100
Somebody else was also recently asking about the same thing:
http://torlus.com/floppy/forum/viewtopi ... =33&t=2998
They were apparently too busy to find the actual solution, or post it if they figured it out, but all the info you need to figure it out on your own is in the thread.
http://torlus.com/floppy/forum/viewtopi ... =33&t=2998
They were apparently too busy to find the actual solution, or post it if they figured it out, but all the info you need to figure it out on your own is in the thread.
-
- Posts: 6
- Joined: Mon Nov 28, 2016 1:48 pm
Re: GOTEK FLOPPY DRIVE EMULATOR SFR1M44-U100
yeah, i've basically been too damn busy with work so i haven't looked any more at this yet... i will post the info once i get it done though....