Note:
Classic ITIL incident layout:I found out that the ribbon cable has to turn opposite compared to the normal floppy drive. If this is not done, then the device won’t get powered at all.
Roland S-330
Enviroment: Roland S-330 with Gotek HxC Usb, but without mouse and RC 100
Symptom: When the normal floppy drive is used, will my device show “inset disk” and with the Gotek HxC it shows a blank screen, but with light in the LED.
Diagnose: -
Action: I tried putting the OS image on a USB stick as Indexed mode – No effect on the boot-up.
Next: Help Jeff or any other with knowledge? Could this have something to do with my jumper settings? (It is now set as S1)