Flashing Gotek

Post Reply
timbo81
Posts: 1
Joined: Sun Oct 09, 2016 3:53 pm

Flashing Gotek

Post by timbo81 »

Good afternoon,

I have managed to install the drivers for my USB to TTL connector in Windows 10, however when flashing the firmware it gets to 48/100 and Windows 10 crashed to BSOD.

Can anyone please offer a suggestion of what to try in order to get this to work?

Thank you

teevee
Posts: 137
Joined: Sun Nov 03, 2013 7:21 pm

Re: Flashing Gotek

Post by teevee »

timbo81 wrote:Good afternoon,

I have managed to install the drivers for my USB to TTL connector in Windows 10, however when flashing the firmware it gets to 48/100 and Windows 10 crashed to BSOD.

Can anyone please offer a suggestion of what to try in order to get this to work?

Thank you
1. Are you connected with Wifi or wired? (I would recommend wired)
2. Do you have the newest TTL driver for your device? (http://www.ftdichip.com/Drivers/D2XX.htm) (Note: I dont know if Windows 10 is supported)
3. Do you get any kind of error message on the booter program while flashing the firmware?

Jeff
Site Admin
Posts: 8092
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: Flashing Gotek

Post by Jeff »


Post Reply