Problem with STM32 Flasher
Problem with STM32 Flasher
Hi,
no matter how often I tried, the STM32 Flasher program just won't show "device decteded" so that I can flash. It just shows "link is up".
However, if I flash the software from Harve Messenger with the STMicroelectronics Flash Loader Software it works right away without any problems.
Please advice on how to solve the problem.
Thx!
no matter how often I tried, the STM32 Flasher program just won't show "device decteded" so that I can flash. It just shows "link is up".
However, if I flash the software from Harve Messenger with the STMicroelectronics Flash Loader Software it works right away without any problems.
Please advice on how to solve the problem.
Thx!
Re: Problem with STM32 Flasher
Status still stays at "Link is UP!. TX and RX are slowly counting up. Status for the serial port is "serial interface set to COM7".
Re: Problem with STM32 Flasher
both RX and TX ? Sure ?skel2raw wrote:Status still stays at "Link is UP!. TX and RX are slowly counting up. Status for the serial port is "serial interface set to COM7".
COM7 is the usb serial interface ? Sure ?
Try to reset the device.
Re: Problem with STM32 Flasher
yep both, RX and TX are counting up simultaniously. And yes, COM7 is the usb serial interface, also a reset several times.
Re: Problem with STM32 Flasher
Is it possible to have a picture of your connections ?skel2raw wrote:yep both, RX and TX are counting up simultaniously. And yes, COM7 is the usb serial interface, also a reset several times.
Re: Problem with STM32 Flasher
I have tried another USB adapter today and now it worked. Thanks for your help!
Re: Problem with STM32 Flasher
ok fine!skel2raw wrote:I have tried another USB adapter today and now it worked. Thanks for your help!
Re: Problem with STM32 Flasher
Which USB adapter did you use to make it work?skel2raw wrote:I have tried another USB adapter today and now it worked. Thanks for your help!
Re: Problem with STM32 Flasher
So is it the case that the STM32 flasher won't work with 64 bit windows 7 or is it dependent on the serial interface?
Re: Problem with STM32 Flasher
It work in windows 7, but some low cost usb serial adapter seems to have buggy driver for windows 7....Dss2 wrote:So is it the case that the STM32 flasher won't work with 64 bit windows 7 or is it dependent on the serial interface?
The same serial interface seems to work on windows XP and others serial interfaces work on both OS...
Re: Problem with STM32 Flasher
Thanks,
I bought a ttl flasher off of ebay with a pl2303 prolific chipset.
Turns out that it does work fine in windows 7 64 bit mode.
I've flashed 4 goteks now. (One goes in an emax 1, one may go into an rm1x, and then I have a couple DSS1s.)
The emax 1 one is working great.
I bought a ttl flasher off of ebay with a pl2303 prolific chipset.
Turns out that it does work fine in windows 7 64 bit mode.
I've flashed 4 goteks now. (One goes in an emax 1, one may go into an rm1x, and then I have a couple DSS1s.)
The emax 1 one is working great.