gotek two-digit display

Post Reply
miro
Posts: 8
Joined: Tue Nov 03, 2015 10:43 pm

gotek two-digit display

Post by miro »

Hi
I Gotek sfrm72-TU100K with a two-digit display.
With the latest firmware v3.0.6.6a working.
Works only in version v3.0.2.5a, button down goes very quickly.
The fix is in firmware v3.0.6.0 shows the dysplay 8.8
well thank you
Attachments
Here's display firmware v3.0.6.0.a and v3.0.6.6a
Here's display firmware v3.0.6.0.a and v3.0.6.6a
display.JPG (126.33 KiB) Viewed 4385 times
Last edited by miro on Wed Nov 25, 2015 8:58 pm, edited 1 time in total.

Jeff
Site Admin
Posts: 8092
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: gotek two-digit display

Post by Jeff »

miro wrote:Hi
With the latest firmware v3.0.6.6a working.
...
So, what is the problem ?

miro
Posts: 8
Joined: Tue Nov 03, 2015 10:43 pm

Re: gotek two-digit display

Post by miro »

Jeff wrote:
miro wrote:Hi
With the latest firmware v3.0.6.6a working.
...
So, what is the problem ?

miro
Posts: 8
Joined: Tue Nov 03, 2015 10:43 pm

Re: gotek two-digit display

Post by miro »

latest firmware 3.0.6.6 does not work properly

miro
Posts: 8
Joined: Tue Nov 03, 2015 10:43 pm

Re: gotek two-digit display

Post by miro »

[

miro
Posts: 8
Joined: Tue Nov 03, 2015 10:43 pm

Re: gotek two-digit display

Post by miro »

Hi
Gotek USB emulator HXC, does not show the "HC" V3_0_3_0a firmware and above.
It's emulator with 2 digit display.
Higher attached photo

Jeff
Site Admin
Posts: 8092
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: gotek two-digit display

Post by Jeff »

miro wrote:Hi
Gotek USB emulator HXC, does not show the "HC" V3_0_3_0a firmware and above.
It's emulator with 2 digit display.
Higher attached photo
ok... i will remove this autodetection and provide differents firmwares for each display type :(

Post Reply