Hi
I Gotek sfrm72-TU100K with a two-digit display.
With the latest firmware v3.0.6.6a working.
Works only in version v3.0.2.5a, button down goes very quickly.
The fix is in firmware v3.0.6.0 shows the dysplay 8.8
well thank you
gotek two-digit display
gotek two-digit display
- Attachments
-
- Here's display firmware v3.0.6.0.a and v3.0.6.6a
- display.JPG (126.33 KiB) Viewed 4432 times
Last edited by miro on Wed Nov 25, 2015 8:58 pm, edited 1 time in total.
Re: gotek two-digit display
So, what is the problem ?miro wrote:Hi
With the latest firmware v3.0.6.6a working.
...
Re: gotek two-digit display
Jeff wrote:So, what is the problem ?miro wrote:Hi
With the latest firmware v3.0.6.6a working.
...
Re: gotek two-digit display
latest firmware 3.0.6.6 does not work properly
Re: gotek two-digit display
Hi
Gotek USB emulator HXC, does not show the "HC" V3_0_3_0a firmware and above.
It's emulator with 2 digit display.
Higher attached photo
Gotek USB emulator HXC, does not show the "HC" V3_0_3_0a firmware and above.
It's emulator with 2 digit display.
Higher attached photo
Re: gotek two-digit display
ok... i will remove this autodetection and provide differents firmwares for each display typemiro wrote:Hi
Gotek USB emulator HXC, does not show the "HC" V3_0_3_0a firmware and above.
It's emulator with 2 digit display.
Higher attached photo