Slot limitation..
Re: Slot limitation..
Thank you so much for all!
Re: Slot limitation..
Good work Jeff, like Tuxxxer, i think 15 slots are few.
Can you send me the compiled autoboot too?
Can you send me the compiled autoboot too?
Re: Slot limitation..
I hope to make public the new autoboot asap.danytyler wrote:Good work Jeff, like Tuxxxer, i think 15 slots are few.
Can you send me the compiled autoboot too?
Re: Slot limitation..
Ok, Jeff, waiting for your new autoboot.
Thank you.
Thank you.
Re: Slot limitation..
Jeff, while waiting, would you mind sending me the compiled autoboot ?
-
- Posts: 4
- Joined: Sun Nov 22, 2015 5:17 pm
Re: Slot limitation..
Hello Everyone. Could somemone describe how to compile new version of amiga file selector or send me current one? I have gotek with newest hxc 3.0.6.6a (IIRC) but selector.adf is from 16 June 2015 and it does not include changes to slot limit.
I have compiled HxCSoftwareEmulation project with required libraries on VS2015 (based on Jeff's info on atari forum) but amiga selector dsw/dsp files are not included in this build as it requires amiga toolchain. I tried to compile it on debian 7 with no success. Could updated autoboot.hfe/selector.adf be included in next HxC update for gotek?
I have also written simple Windows GUI editor for changing ADF files -> slot assigment in HxC config file (VS2015 C#) but gotek don't see slots greater than 15 (num_of_slots changed and ADF files assigned to this slots). From config file specification I see that there is place for 255 slots.
I have compiled HxCSoftwareEmulation project with required libraries on VS2015 (based on Jeff's info on atari forum) but amiga selector dsw/dsp files are not included in this build as it requires amiga toolchain. I tried to compile it on debian 7 with no success. Could updated autoboot.hfe/selector.adf be included in next HxC update for gotek?
I have also written simple Windows GUI editor for changing ADF files -> slot assigment in HxC config file (VS2015 C#) but gotek don't see slots greater than 15 (num_of_slots changed and ADF files assigned to this slots). From config file specification I see that there is place for 255 slots.
Re: Slot limitation..
Sorry to everyone, i am actually quite busy with others stuff. Anyway here is the beta version :
https://hxc2001.com/download/floppy_driv ... T_beta.zip
https://hxc2001.com/download/floppy_driv ... T_beta.zip
Yes exactly. You should be able to assign more than 15 slots.jimmy_di_griz wrote: I have also written simple Windows GUI editor for changing ADF files -> slot assigment in HxC config file (VS2015 C#) but gotek don't see slots greater than 15 (num_of_slots changed and ADF files assigned to this slots). From config file specification I see that there is place for 255 slots.
-
- Posts: 4
- Joined: Sun Nov 22, 2015 5:17 pm
Re: Slot limitation..
Thank you very much, Jeff. No rush. I was just curious how to do it myself.
I understand that this limit (15/56) is hardcoded into selector so it won't allow to choose slot greater than 56 even if I add ADFs into higer slots with my editor?
I understand that this limit (15/56) is hardcoded into selector so it won't allow to choose slot greater than 56 even if I add ADFs into higer slots with my editor?
Re: Slot limitation..
New autoboot!.
I´m going to install it.
Thank you Jeff.
I´m going to install it.
Thank you Jeff.
Re: Slot limitation..
New beta software :
https://hxc2001.com/download/floppy_driv ... T_beta.zip
This time the limitation is set to 250 slots
Replace you cfg file too to get this quantity.
https://hxc2001.com/download/floppy_driv ... T_beta.zip
This time the limitation is set to 250 slots
Replace you cfg file too to get this quantity.
Re: Slot limitation..
250 slots! That is a number !
Thank you very much for the new version
I will try it right away!
Thank you very much for the new version
I will try it right away!
-
- Posts: 4
- Joined: Sun Nov 22, 2015 5:17 pm
Re: Slot limitation..
"Show current slot assignments" option with TAB key is not working properly in beta version. List is displayed only on a fraction of second then it returns to previous screen. E-mail with the same problem was sent today by member of another forum.
Re: Slot limitation..
This function will be removed.jimmy_di_griz wrote:"Show current slot assignments" option with TAB key is not working properly in beta version. List is displayed only on a fraction of second then it returns to previous screen. E-mail with the same problem was sent today by member of another forum.
-
- Posts: 4
- Joined: Sun Nov 22, 2015 5:17 pm
Re: Slot limitation..
Thank you for quick response. So only possibility to see slot list will be when trying to assign new image? Or maybe slot list will be visible as main screen (something similar to cortex)?